topic Re: How to configure WLC to work with ACS5.0 in Network Access Control

How to configure WLC to work with ACS5.0

ericohermoso — Mon, 11 Mar 2019 00:15:56 GMT

Hello,

I have wireless users and needs to authenticate using ACS5.0. Please how can i configure WLC and ACS5.0.

thank you and best regards

Edwin

Re: How to configure WLC to work with ACS5.0

jrabinow — Tue, 20 Jul 2010 15:54:34 GMT

I think it will be best if you do this with ACS 5.1 . ACS 5.1 supports custom attributes/services with TACACS+

Re: How to configure WLC to work with ACS5.0

Eric Hansen — Tue, 20 Jul 2010 16:08:45 GMT

Where are your users stored? In ACS or in some other system like MS Active Directory?

**edit

Assuming you are talking to AD and you worked out your certs and all that junk with AD, one thing I saw with the WLC controllers specifically with the ones that go into the 6500's is they talk to ACS on multiple IP's. I had to setup the Network Devices on the ACS for both the management IP of the WLC and the control IP in the specific VLANs wireless clients were going to be depostied in. *see attached* It took a call to tac to find it and in their words "oh thats kinda odd". hth