topic Re: ACS 4.2 For Windows DB Replication in Network Access Control https://community.cisco.com/t5/network-access-control/acs-4-2-for-windows-db-replication/m-p/1438610#M331994 <HTML><HEAD></HEAD><BODY><P><SPAN class="content"></SPAN></P><P class="pB1_Body1"><SPAN style="color: #800000;">The following items cannot be replicated: </SPAN></P><SPAN style="color: #800000;"><A name="wp756119"></A></SPAN><P class="pBu1_Bullet1"><SPAN style="color: #800000;"> •<IMG border="0" height="2" src="http://www.ciscosystems.com/en/US/i/templates/blank.gif" width="19" />IP pool definitions (for more information, see <A href="http://www.ciscosystems.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/user/guide/SCAdv.html#wp757820" onclick="">About IP Pools Server</A>). </SPAN></P><SPAN style="color: #800000;"><A name="wp756121"></A></SPAN><P class="pBu1_Bullet1"><SPAN style="color: #800000;"> •<IMG border="0" height="2" src="http://www.ciscosystems.com/en/US/i/templates/blank.gif" width="19" />ACS certificate and private key files. </SPAN></P><SPAN style="color: #800000;"><A name="wp756125"></A></SPAN><P class="pBu1_Bullet1"><SPAN style="color: #800000;"><STRONG>•<IMG border="0" height="2" src="http://www.ciscosystems.com/en/US/i/templates/blank.gif" width="19" />Unknown user group mapping configuration</STRONG>. </SPAN></P><SPAN style="color: #800000;"><A name="wp779811"></A></SPAN><P class="pBu1_Bullet1"><SPAN style="color: #800000;"> •<IMG border="0" height="2" src="http://www.ciscosystems.com/en/US/i/templates/blank.gif" width="19" />Dynamically-mapped users. </SPAN></P><SPAN style="color: #800000;"><A name="wp756132"></A></SPAN><P class="pBu1_Bullet1"><SPAN style="color: #800000;"> •<IMG border="0" height="2" src="http://www.ciscosystems.com/en/US/i/templates/blank.gif" width="19" />Settings on the ACS Service Management page in the System Configuration section. </SPAN></P><SPAN style="color: #800000;"><A name="wp880334"></A></SPAN><P class="pBu1_Bullet1"><SPAN style="color: #800000;"> •<IMG border="0" height="2" src="http://www.ciscosystems.com/en/US/i/templates/blank.gif" width="19" />RDBMS Synchronization settings. </SPAN></P><P class="pBu1_Bullet1"><SPAN style="color: #800000;"><BR /></SPAN></P><P class="pBu1_Bullet1"><SPAN style="color: #800000;">User guide<BR /></SPAN></P><P class="pBu1_Bullet1"><SPAN style="color: #800000;"><A class="jive-link-external-small" href="http://www.ciscosystems.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/user/guide/SCAdv.html#wp756078">http://www.ciscosystems.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/user/guide/SCAdv.html#wp756078</A><BR /></SPAN></P><P class="pBu1_Bullet1"><SPAN style="color: #800000;"><BR /></SPAN></P><P class="pBu1_Bullet1"><SPAN style="color: #800000;">Regards,</SPAN></P><P class="pBu1_Bullet1"><SPAN style="color: #800000;">Jatin</SPAN></P><P class="pBu1_Bullet1"><SPAN style="color: #800000;"><BR /></SPAN></P><P class="pBu1_Bullet1"><SPAN style="color: #800000;">Do rate helpful posts-</SPAN></P><P></P></BODY></HTML> Wed, 14 Jul 2010 09:27:16 GMT Jatin Katyal 2010-07-14T09:27:16Z ACS 4.2 For Windows DB Replication https://community.cisco.com/t5/network-access-control/acs-4-2-for-windows-db-replication/m-p/1438607#M331918 <P>Hi Folks.</P><P></P><P>I have a pair of ACS for windows 4,2 and we also have a few mappings (ACS Group --&gt; AD Group)</P><P></P><P>The replication process was configured and it replicates all the seetings, but the Group Mappings.</P><P></P><P>Is this the way it's supposed to be or it should replicate the group mappings as well?</P><P></P><P></P><P>Best regards,</P><P></P><P>AL</P> Mon, 11 Mar 2019 00:15:24 GMT https://community.cisco.com/t5/network-access-control/acs-4-2-for-windows-db-replication/m-p/1438607#M331918 Alvaro Luiz Maia Motta 2019-03-11T00:15:24Z Re: ACS 4.2 For Windows DB Replication https://community.cisco.com/t5/network-access-control/acs-4-2-for-windows-db-replication/m-p/1438608#M331929 <HTML><HEAD></HEAD><BODY><P>I think it depends on what options you have selected under:</P><P></P><P>system / ACS Internal Database replication / replication components</P><P></P><P>You can set the send or receive options. One is 'user and group database' the next one is 'group database only'.</P><P>You also can't do NDGs and NAPs at the same time - has to be one or the other.</P></BODY></HTML> Wed, 14 Jul 2010 00:30:32 GMT https://community.cisco.com/t5/network-access-control/acs-4-2-for-windows-db-replication/m-p/1438608#M331929 robmillet 2010-07-14T00:30:32Z Re: ACS 4.2 For Windows DB Replication https://community.cisco.com/t5/network-access-control/acs-4-2-for-windows-db-replication/m-p/1438609#M331944 <HTML><HEAD></HEAD><BODY><PRE __jive_macro_name="quote" class="jive_text_macro jive_macro_quote"><DIV class="jive-rendered-content"><P>Hi Folks.</P><P></P><P>I have a pair of ACS for windows 4,2 and we also have a few mappings (ACS Group --&gt; AD Group)</P><P></P><P>The replication process was configured and it replicates all the seetings, but the Group Mappings.</P><P></P><P>Is this the way it's supposed to be or it should replicate the group mappings as well?</P><P></P><P></P><P>Best regards,</P><P></P><P>AL</P></DIV><P></P></PRE><P>Hi ,</P><P></P><P>Rob is right selected parameter under replication tab will replicated to secondary ACS,check under system configuration--database replciation then the following paramters are selected for replication in Primary ACS.</P><P></P><P>Hope to Help !!</P><P></P><P>Ganesh.H</P><P></P><P>Remember to rate the helpful post</P></BODY></HTML> Wed, 14 Jul 2010 08:45:08 GMT https://community.cisco.com/t5/network-access-control/acs-4-2-for-windows-db-replication/m-p/1438609#M331944 Ganesh Hariharan 2010-07-14T08:45:08Z Re: ACS 4.2 For Windows DB Replication https://community.cisco.com/t5/network-access-control/acs-4-2-for-windows-db-replication/m-p/1438610#M331994 <HTML><HEAD></HEAD><BODY><P><SPAN class="content"></SPAN></P><P class="pB1_Body1"><SPAN style="color: #800000;">The following items cannot be replicated: </SPAN></P><SPAN style="color: #800000;"><A name="wp756119"></A></SPAN><P class="pBu1_Bullet1"><SPAN style="color: #800000;"> •<IMG border="0" height="2" src="http://www.ciscosystems.com/en/US/i/templates/blank.gif" width="19" />IP pool definitions (for more information, see <A href="http://www.ciscosystems.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/user/guide/SCAdv.html#wp757820" onclick="">About IP Pools Server</A>). </SPAN></P><SPAN style="color: #800000;"><A name="wp756121"></A></SPAN><P class="pBu1_Bullet1"><SPAN style="color: #800000;"> •<IMG border="0" height="2" src="http://www.ciscosystems.com/en/US/i/templates/blank.gif" width="19" />ACS certificate and private key files. </SPAN></P><SPAN style="color: #800000;"><A name="wp756125"></A></SPAN><P class="pBu1_Bullet1"><SPAN style="color: #800000;"><STRONG>•<IMG border="0" height="2" src="http://www.ciscosystems.com/en/US/i/templates/blank.gif" width="19" />Unknown user group mapping configuration</STRONG>. </SPAN></P><SPAN style="color: #800000;"><A name="wp779811"></A></SPAN><P class="pBu1_Bullet1"><SPAN style="color: #800000;"> •<IMG border="0" height="2" src="http://www.ciscosystems.com/en/US/i/templates/blank.gif" width="19" />Dynamically-mapped users. </SPAN></P><SPAN style="color: #800000;"><A name="wp756132"></A></SPAN><P class="pBu1_Bullet1"><SPAN style="color: #800000;"> •<IMG border="0" height="2" src="http://www.ciscosystems.com/en/US/i/templates/blank.gif" width="19" />Settings on the ACS Service Management page in the System Configuration section. </SPAN></P><SPAN style="color: #800000;"><A name="wp880334"></A></SPAN><P class="pBu1_Bullet1"><SPAN style="color: #800000;"> •<IMG border="0" height="2" src="http://www.ciscosystems.com/en/US/i/templates/blank.gif" width="19" />RDBMS Synchronization settings. </SPAN></P><P class="pBu1_Bullet1"><SPAN style="color: #800000;"><BR /></SPAN></P><P class="pBu1_Bullet1"><SPAN style="color: #800000;">User guide<BR /></SPAN></P><P class="pBu1_Bullet1"><SPAN style="color: #800000;"><A class="jive-link-external-small" href="http://www.ciscosystems.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/user/guide/SCAdv.html#wp756078">http://www.ciscosystems.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/user/guide/SCAdv.html#wp756078</A><BR /></SPAN></P><P class="pBu1_Bullet1"><SPAN style="color: #800000;"><BR /></SPAN></P><P class="pBu1_Bullet1"><SPAN style="color: #800000;">Regards,</SPAN></P><P class="pBu1_Bullet1"><SPAN style="color: #800000;">Jatin</SPAN></P><P class="pBu1_Bullet1"><SPAN style="color: #800000;"><BR /></SPAN></P><P class="pBu1_Bullet1"><SPAN style="color: #800000;">Do rate helpful posts-</SPAN></P><P></P></BODY></HTML> Wed, 14 Jul 2010 09:27:16 GMT https://community.cisco.com/t5/network-access-control/acs-4-2-for-windows-db-replication/m-p/1438610#M331994 Jatin Katyal 2010-07-14T09:27:16Z