topic Re: Failover and authentication in Network Access Control https://community.cisco.com/t5/network-access-control/failover-and-authentication/m-p/149042#M3337 <HTML><HEAD></HEAD><BODY><P>As far as my knowledge goes, it is just md5 checksum for packet authentication.</P><P></P></BODY></HTML> Mon, 21 Jul 2003 14:22:47 GMT umedryk 2003-07-21T14:22:47Z Failover and authentication https://community.cisco.com/t5/network-access-control/failover-and-authentication/m-p/149041#M3336 <P>Doing a threat-risk on pix-pix LAN based failover with authentication and stateful options. On the failover LAN link itself I'm seeing EGP(8) and SCSP(105) unicast traffic whilst on the actual failover interfaces I only see SCSP. This makes sense given that the protocol 8 traffic is supposedly the session state information. What I'm wondering is what type of packet authentication is used - is it just md5 checksuming, and is the authentication also applied to the prot 8 traffic as well as the SCSP?</P> Fri, 21 Feb 2020 18:07:35 GMT https://community.cisco.com/t5/network-access-control/failover-and-authentication/m-p/149041#M3336 gmiiller 2020-02-21T18:07:35Z Re: Failover and authentication https://community.cisco.com/t5/network-access-control/failover-and-authentication/m-p/149042#M3337 <HTML><HEAD></HEAD><BODY><P>As far as my knowledge goes, it is just md5 checksum for packet authentication.</P><P></P></BODY></HTML> Mon, 21 Jul 2003 14:22:47 GMT https://community.cisco.com/t5/network-access-control/failover-and-authentication/m-p/149042#M3337 umedryk 2003-07-21T14:22:47Z