topic Re: ISG ACCOUNTING in Network Access Control

ISG ACCOUNTING

javiercastro — Sun, 10 Mar 2019 23:43:07 GMT

Hello!

I'm trying to trigger accounting notifications from an ISG Router to a Radius Server.

Whenever a IP Session is created or deleted accounting notifications should be sent to the radius server. The problem is that the aaa accounting messages are not being sent to the server.

The following configuration is applied:

aaa new-model

aaa accounting network ISG start-stop group radius

aaa session-id common

ip dhcp pool test

network 172.16.1.0 255.255.255.0

subscriber feature accounting send ssg-compatible-vsas

call rsvp-sync

no scripting tcl init

no scripting tcl encdir

class-map type traffic match-any account

policy-map type service ACC

class type traffic account

accounting aaa list ISG

interface GigabitEthernet0/1

ip address 172.16.1.1 255.255.255.0

media-type rj45

speed auto

duplex auto

negotiation auto

ip subscriber l2-connected

initiator dhcp

radius-server host 192.168.12.190 auth-port 1645 acct-port 1646 key cisco

radius-server vsa send accounting

The AAA debug output is the following:

2d18h: AAA/ACCT/HC(00000038): Register IEDGE_IP_SIP/C900002A 846Mbit/s, poll every 30.3000s

2d18h: AAA/ACCT/HC(00000038): Update IEDGE_IP_SIP/C900002A

2d18h: AAA/ACCT/HC(00000038): IEDGE_IP_SIP/C900002A [init-sess] (rx/tx) base 0/0 pre 0/0 call 0/0

2d18h: AAA/ACCT/HC(00000038): IEDGE_IP_SIP/C900002A [init-sess] (rx/tx) adjusted, pre 0/0 call 0/0

2d18h: AAA/ACCT/EVENT/(00000038): CALL START

2d18h: Getting session id for NET(00000038) : db=64EC2680

2d18h: AAA/ACCT(00000000): add node, session 46

2d18h: AAA/ACCT/NET(00000038): add, count 1

2d18h: AAA/ACCT/EVENT/(00000038): IPCP_PASS

2d18h: AAA/ACCT/NET(00000038): Method list not found

Does anybody have had any similar experience? why "method list not found" is appearing in the debug message?

Re: ISG ACCOUNTING

Jatin Katyal — Mon, 05 Oct 2009 17:42:23 GMT

Hi,

Looking at currect config, everything seems fine.

What version are you running on?

You may check this bug:

CSCsk94472 iEdge-QoS:Service accounting info is missing in"show subscriber session"

Duplicated by:

CSCsm75945 The accounting method-list is not applied correctly on ISG.

HTH

Re: ISG ACCOUNTING

javiercastro — Mon, 05 Oct 2009 17:56:35 GMT

Running the following Version 12.2(31)SB12.

Re: ISG ACCOUNTING

javiercastro — Tue, 06 Oct 2009 13:39:34 GMT

I have just upgraded to 12.2(31)SB16 and still behaving the same way 😞

According to the Bugs you mention, the problem should be fixed already in 12.2(31)SB12.

Do you have any further ideas?

Re: ISG ACCOUNTING

chrmar — Thu, 15 Oct 2009 21:01:29 GMT

You have not defined the method list ISG:

aaa group server radius ISG

server 192.168.12.190 auth-port 1645 acct-port 1646

(assuming you want to use that radius server for accounting)