topic Check if Tacacs is configured in Network Access Control

Check if Tacacs is configured

william — Sun, 10 Mar 2019 23:38:47 GMT

Hi all,

Is it possible to confirm if all routers/switches has been configured with Tacacs with CiscoWorks?

We have a large number of equipment and I need to ensure that all of it authneticates from our ACS servers.

Thanks.

Re: Check if Tacacs is configured

mchin345 — Tue, 18 Aug 2009 15:36:37 GMT

All the router/switch will not supports the TACACS.

The Cisco Catalyst family of switches (Catalyst 4000, Catalyst 5000, and Catalyst 6000 that run CatOS) has supported TACACS.

You must have access to and must configure a TACACS server before configuring the TACACS features on your Cisco router.

http://www.cisco.com/en/US/docs/ios/11_3/security/configuration/guide/sctcacs.html

Re: Check if Tacacs is configured

Yudong Wu — Tue, 18 Aug 2009 15:53:52 GMT

How about use CiscoWork to push your AAA configuration to all devices in your network. In this way, you can ensure all of them have the related authentication configuration.