topic CSACS-1121 NIC Teaming in Network Access Control

CSACS-1121 NIC Teaming

ThibaultMean — Mon, 11 Mar 2019 00:29:12 GMT

Hello,

Is it possible to configure a NIC team on the 1121 appliance?

Regards,

Thibault Mean.

Re: CSACS-1121 NIC Teaming

Federico Lovison — Wed, 13 Oct 2010 13:40:24 GMT

Hi Thibault,

the second NIC on the ACS appliance is actually not supported, so you have to connect ACS only using the GigabitEthernet0 interface:

On the installation guide:

http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.1/installation/guide/csacs_hw_ins.html#wp1119105

You can also see that the only interface "in use" is indeed GigabitEthernet0.

I hope this helps.

Regards,

Federico

If this answers your question please mark the question as "answered" and rate it, so other users can easily find it.

Re: CSACS-1121 NIC Teaming

ThibaultMean — Wed, 13 Oct 2010 13:42:16 GMT

Thanks for your answer.

Re: CSACS-1121 NIC Teaming

ThibaultMean — Thu, 14 Oct 2010 08:53:58 GMT

Hello,

Is it the same for the SIT interface (I guess the mgmt one).

I can't find anything in the install guide or in the user guide on how to configure it and the command "interface" in configuration mode only refers to

the GigabitEthernet interfaces.

Maybe I should look harder.

Regards,

Thibault.