topic ACS4.1 not responding in Network Access Control https://community.cisco.com/t5/network-access-control/acs4-1-not-responding/m-p/1308925#M343572 <P>hi,</P><P></P><P>currently i want to authenticate 2960 switch to ACS4.1..(i already tested the configuration in VMWare and is successful)..but on runing environment when i enter the username and password on switch the ACS shows that the authentication is succesful ("Report and activity" button) but the switch is showing failed authentication... i used debug aaa authentication...attached file shows the result of the debug.. </P><P></P><P>Regards</P><P></P><P>Naresh</P><P></P><P> </P><P></P> Sun, 10 Mar 2019 23:36:32 GMT nareh84 2019-03-10T23:36:32Z ACS4.1 not responding https://community.cisco.com/t5/network-access-control/acs4-1-not-responding/m-p/1308925#M343572 <P>hi,</P><P></P><P>currently i want to authenticate 2960 switch to ACS4.1..(i already tested the configuration in VMWare and is successful)..but on runing environment when i enter the username and password on switch the ACS shows that the authentication is succesful ("Report and activity" button) but the switch is showing failed authentication... i used debug aaa authentication...attached file shows the result of the debug.. </P><P></P><P>Regards</P><P></P><P>Naresh</P><P></P><P> </P><P></P> Sun, 10 Mar 2019 23:36:32 GMT https://community.cisco.com/t5/network-access-control/acs4-1-not-responding/m-p/1308925#M343572 nareh84 2019-03-10T23:36:32Z Re: ACS4.1 not responding https://community.cisco.com/t5/network-access-control/acs4-1-not-responding/m-p/1308926#M343573 <HTML><HEAD></HEAD><BODY><P>i also want to tell that ACS 4.1 is a solution engine, ping is unsuccessful, AP is successfully authenticating the user but switch 2960 fails to authenticate and giving the error mentioned above</P><P></P><P>Regard</P><P></P><P>Naresh</P></BODY></HTML> Tue, 28 Jul 2009 06:44:46 GMT https://community.cisco.com/t5/network-access-control/acs4-1-not-responding/m-p/1308926#M343573 nareh84 2009-07-28T06:44:46Z Re: ACS4.1 not responding https://community.cisco.com/t5/network-access-control/acs4-1-not-responding/m-p/1308927#M343574 <HTML><HEAD></HEAD><BODY><P>Naresh,</P><P>Please increase the radius timeout and that should help.</P><P></P><P></P><P>Regards,</P><P>~JG</P><P></P><P>Do rate helpful posts</P></BODY></HTML> Tue, 28 Jul 2009 15:52:16 GMT https://community.cisco.com/t5/network-access-control/acs4-1-not-responding/m-p/1308927#M343574 Jagdeep Gambhir 2009-07-28T15:52:16Z