Radius Attribute Issue

worldcalltel — Sun, 10 Mar 2019 23:35:41 GMT

Hi,

I'm having some issues on implementing radius accounting. Below are my configurations

aaa group server radius ClearBox

server 192.168.111.8 auth-port 1812 acct-port 1813

accounting accept ClearBox

aaa accounting exec default start-stop group ClearBox

aaa accounting network default start-stop group ClearBox

aaa accounting connection h323 start-stop group ClearBox

aaa accounting resource default start-stop group ClearBox

aaa session-id common

gw-accounting aaa

radius-server attribute list ClearBox

attribute 1,4-6,25-26,28-31,40-41,44,46,49,61

radius-server host 192.168.111.8 auth-port 1812 acct-port 1813

radius-server key 7 12481603171B5B55

radius-server vsa send accounting

I am using ClearBox as my radius server. It seems that the ff attributes (h323-connect-time,h323-disconnect-time,h323-disconnect-cause,) was not recorded on the ClearBox. See attached file for the screenshot. May be you can help me on this issue.

Re: Radius Attribute Issue

gmarogi — Tue, 21 Jul 2009 14:00:35 GMT

Try to enable the following debugs:

debug isdn q931

debug ppp negotiation

debug aaa authen

debug aaa accounting

debug radius

topic Radius Attribute Issue in Network Access Control

Radius Attribute Issue

Re: Radius Attribute Issue