topic Re: Update in progress..... in Network Access Control

Update in progress.....

Kurt Warner — Mon, 11 Mar 2019 00:32:19 GMT

I am trying to upgrade my ACS 1120 from 5.0.21 to 5.1 but as i understand it i have to add patch 5-0-0-21-9.tar.gpg First. I am using the web interface with the ACS and i am choosing Retrieve From Client browseing to the 5-0-0-21-9.tar.gpg file and then applying upgrade. When im able tolog back in all i see in the Distributed System Management is update in progress. How do i know this is working? ho wlong should i wait before i reboot the box or just cancel the update? Am i doing this correctly ?

Re: Update in progress.....

aneelaka — Mon, 01 Nov 2010 19:14:38 GMT

In ACS 5.x only changes on the primary gets replicated , if it is displaying update in progress, could be just a cosemtic messages. Try making changes on primary and test to see if this changes are being replicated to secondary. If it is stuck on update in progress, you may need to disjoin the secondary from replication partner and rejoin

Re: Update in progress.....

Yudong Wu — Mon, 01 Nov 2010 19:19:38 GMT

I followed the procedure in the following link to upgrading from 5.0 to 5.1 without any problem.

http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.1/installation/guide/csacs_upg.html#wp1167547

I would suggest you to use Command line instead of GUI.

If you can login to the appliance via ssh, you can use "show ver" to see if the patch was installed correctly.

acs5fcs/admin# sh ver

Cisco Application Deployment Engine OS Release: 1.1 Build Version: 1.1.0.416 Copyright (c) 2005-2008 by Cisco Systems, Inc.
All rights reserved.
Hostname: acs5fcs

Version information of installed applications
---------------------------------------------

Cisco ACS VERSION INFORMATION
-----------------------------
Version : 5.0.0.21
Internal Build ID : B.2757
Patches :
5.0.0.21.9 <<<<<<<<<<<<<<<<
Patch installed

acs5fcs/admin#

Re: Update in progress.....

jrabinow — Mon, 01 Nov 2010 19:22:21 GMT

Is this a standalone story or a deployment?

You can check whether the expected version did in fact get downloaded by looking at about box for server where download was done

There is a bug in 5.0 where gets stuck in this state during download and "Cancel" will free it up

Also in 5.0 it can be more reliable to do patch install from the CLI

Re: Update in progress.....

Kurt Warner — Mon, 01 Nov 2010 19:46:50 GMT

It is a Stand alone. Trying it from the CLI is my next step.

Re: Update in progress.....

Kurt Warner — Mon, 01 Nov 2010 20:11:34 GMT

i got it done in the CLI seems the GUI just wasnt cutting it!

Re: Update in progress.....

Yudong Wu — Mon, 01 Nov 2010 20:59:06 GMT

Did I suggest you to use command line?

Re: Update in progress.....

Kurt Warner — Tue, 02 Nov 2010 13:20:24 GMT

yes, you did and thank you for the help