topic ACS Engine Failover Deployment in Network Access Control

ACS Engine Failover Deployment

abuatiya — Sun, 10 Mar 2019 23:27:23 GMT

Hello,

I want reference guide for implementing ACS Engine Failover Deployment, I could not find any scenario for deploying Failover.

Thanks

Re: ACS Engine Failover Deployment

Jagdeep Gambhir — Wed, 22 Apr 2009 15:46:27 GMT

Check out this link,

http://cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a0080742f60.shtml

Regards,

~JG

Re: ACS Engine Failover Deployment

abuatiya — Fri, 01 May 2009 20:51:26 GMT

Thanks for your reply. I have deployed same as mentioned in the document and working perfectly for the replication.

But i have serious problem. if i disconnect the network cable or restart the unit for example the primary one, the IP address on AAA server changed from the private IP 192.168.x.x to loopback IP 127.0.0.1.

Please advice.

Re: ACS Engine Failover Deployment

Jagdeep Gambhir — Mon, 04 May 2009 23:11:27 GMT

This is due to this bug ,

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?caller=pluginredirector&method=fetchBugDetails&bugId=CSCso39795

Regards,

~JG

Do rate helpful posts