topic Re: ACS 5.0 in Network Access Control

ACS 5.0

Leo Bruni — Mon, 11 Mar 2019 00:16:29 GMT

I have just installed the ACS 1120 appliance with ACS 5.0. It was working fine for about a week. Now however I am getting the following error message when I try to start monitoring: The monitoring and reports database is currently unavailable. Attempting to reconnect in 5 seconds.
If problem persists, please contact your ACS administrator.

I have reloaded the appliance several times and the error persists.

Re: ACS 5.0

ThibaultMean — Wed, 21 Jul 2010 13:16:32 GMT

Hi there,

i thin kthe answer is in a previous post.

using the CLI, enter the following command:

show applicaion status acs

That should tell you wether all the services are running.

Anyway I fixed by reloading the box (which is not great).

Regards.

Re: ACS 5.0

Leo Bruni — Wed, 21 Jul 2010 13:22:17 GMT

I have checked the application status and it states that all processes are running. This includes the database process. I also have now reloaded the box at least 10 times with no change.

Re: ACS 5.0

michagar — Sun, 25 Jul 2010 19:43:42 GMT

If all services are running, then it could be an issue that would need greater debugging from CLI. If this is a new install that hasnt been moved into production yet, I would suggest re-imaging to the latest version of ACS (5.1 Patch level 3)

-Mike

Re: ACS 5.0

phamthanhchuong — Thu, 29 Jul 2010 07:34:53 GMT

Hi,

Can anyone send to me ACS 5.0 configuration document?? i don't know how to config acs 1120 appliance

Please, i need argent

Thanks for support