MAB with ACS 4.2: VLAN Mapping

schuetzm — Sun, 10 Mar 2019 23:14:02 GMT

Hi,

i've configured an ACS 4.2, catalyst's 2950 and 3750 for MAB. This is working so far. Can i map a mac-address to a vlan-id via ACS?

Kind regards

Matthias

Re: MAB with ACS 4.2: VLAN Mapping

ariantow123 — Sat, 13 Dec 2008 02:46:04 GMT

hi Matthias,

if you configure MAB, so you're using NAP right?

in authentication section you can list the MAC addresses and on right coloum there is user group to associate the MAC with group.

and in every group you can define the VLAN id.

but btw is catalyst 2950 support MAB, i ever try but there is no command for MAB (dot1x mac-auth-bypass).

br,