topic Re: ip pool assign with RAC in Network Access Control https://community.cisco.com/t5/network-access-control/ip-pool-assign-with-rac/m-p/1066210#M359508 <HTML><HEAD></HEAD><BODY><P>Hi Hossam Adbou, thank you for relay.</P><P></P><P>I need to associate different Radius attribute when an user is connecting on different NAS client. For example:</P><P></P><P>Case 1: user1 connect on VPN concentrator and I don't need to assign IP pool.</P><P></P><P>Case 2: user1 connect on dialup via RAS and i need to assign IP pool.</P><P></P><P>I used Network Access Profile to identify request from a NAS and assign a RAC but there isn't possibility to configure the attribute 8 (Framed-IP-Address).</P><P></P></BODY></HTML> Wed, 19 Nov 2008 18:03:39 GMT ipagliani 2008-11-19T18:03:39Z ip pool assign with RAC https://community.cisco.com/t5/network-access-control/ip-pool-assign-with-rac/m-p/1066208#M359506 <P>Hello,</P><P>does anyone try to associate a ip pool using RAC ? I'm not see the IETF radius attribute 8 (Framed-IP-Address) in configuration. rIs it right?</P><P>Thanks</P> Sun, 10 Mar 2019 23:11:19 GMT https://community.cisco.com/t5/network-access-control/ip-pool-assign-with-rac/m-p/1066208#M359506 ipagliani 2019-03-10T23:11:19Z Re: ip pool assign with RAC https://community.cisco.com/t5/network-access-control/ip-pool-assign-with-rac/m-p/1066209#M359507 <HTML><HEAD></HEAD><BODY><P>Could you please give more background on your config?</P></BODY></HTML> Wed, 19 Nov 2008 16:57:44 GMT https://community.cisco.com/t5/network-access-control/ip-pool-assign-with-rac/m-p/1066209#M359507 hadbou 2008-11-19T16:57:44Z Re: ip pool assign with RAC https://community.cisco.com/t5/network-access-control/ip-pool-assign-with-rac/m-p/1066210#M359508 <HTML><HEAD></HEAD><BODY><P>Hi Hossam Adbou, thank you for relay.</P><P></P><P>I need to associate different Radius attribute when an user is connecting on different NAS client. For example:</P><P></P><P>Case 1: user1 connect on VPN concentrator and I don't need to assign IP pool.</P><P></P><P>Case 2: user1 connect on dialup via RAS and i need to assign IP pool.</P><P></P><P>I used Network Access Profile to identify request from a NAS and assign a RAC but there isn't possibility to configure the attribute 8 (Framed-IP-Address).</P><P></P></BODY></HTML> Wed, 19 Nov 2008 18:03:39 GMT https://community.cisco.com/t5/network-access-control/ip-pool-assign-with-rac/m-p/1066210#M359508 ipagliani 2008-11-19T18:03:39Z Re: ip pool assign with RAC https://community.cisco.com/t5/network-access-control/ip-pool-assign-with-rac/m-p/1066211#M359509 <HTML><HEAD></HEAD><BODY><P>hi</P><P></P><P>I have the same problem. The RAC isn't possibility to configure the attribute 8 (Framed-IP-Address). </P><P></P><P>Any idea?</P><P></P><P>Thanks</P></BODY></HTML> Tue, 12 May 2009 16:01:08 GMT https://community.cisco.com/t5/network-access-control/ip-pool-assign-with-rac/m-p/1066211#M359509 l_osa 2009-05-12T16:01:08Z