topic Re: How to migrate from ACS 2.6 (windows) to Cisco Secure ACS 4. in Network Access Control https://community.cisco.com/t5/network-access-control/how-to-migrate-from-acs-2-6-windows-to-cisco-secure-acs-4-2/m-p/1127963#M364681 <HTML><HEAD></HEAD><BODY><P>Is there any way to get these install images? TAC says I'm not allowed, because apparently buying two 4.2 SE's isn't enough to get older software images...</P><P></P><P>thanks!</P></BODY></HTML> Tue, 12 May 2009 21:41:39 GMT shamrockfoods 2009-05-12T21:41:39Z How to migrate from ACS 2.6 (windows) to Cisco Secure ACS 4.2 appliance https://community.cisco.com/t5/network-access-control/how-to-migrate-from-acs-2-6-windows-to-cisco-secure-acs-4-2/m-p/1127960#M364623 <P>What I need is a guideline on how to duplicate / migrate the configuration currently used on Cisco ACS for Windows v2.6 to the ACS 4.2 appliance (1113).</P><P></P><P>There are about 2000 k users and a lot of groups that need to be transfered to the new version.</P><P></P><P>All the users are stored local. Is there any way to trnsfer the users and some of the configuration to the new one?</P><P></P><P>Any help would appreciated.</P><P>Thanks</P> Sun, 10 Mar 2019 23:12:15 GMT https://community.cisco.com/t5/network-access-control/how-to-migrate-from-acs-2-6-windows-to-cisco-secure-acs-4-2/m-p/1127960#M364623 smartnet.nic 2019-03-10T23:12:15Z Re: How to migrate from ACS 2.6 (windows) to Cisco Secure ACS 4. https://community.cisco.com/t5/network-access-control/how-to-migrate-from-acs-2-6-windows-to-cisco-secure-acs-4-2/m-p/1127961#M364647 <HTML><HEAD></HEAD><BODY><P>I'm not sure about 2.6 for Windows, but we recently migrated from 4.0 for Windows to 4.2 appliance.</P><P></P><P>The logical steps are:</P><P>Upgrade from 2.6 to 4.2 for Windows</P><P>Backup config from 4.2 for Windows</P><P>Restore config to ACS SE</P><P></P><P>If you're not licensed for 4.2 for Windows, I guess you can export and then import the users and groups through CSUtil or RDBMS.</P><P></P><P>Check w/ TAC or your SE and see what they say.</P></BODY></HTML> Tue, 25 Nov 2008 23:29:59 GMT https://community.cisco.com/t5/network-access-control/how-to-migrate-from-acs-2-6-windows-to-cisco-secure-acs-4-2/m-p/1127961#M364647 huangedmc 2008-11-25T23:29:59Z Re: How to migrate from ACS 2.6 (windows) to Cisco Secure ACS 4. https://community.cisco.com/t5/network-access-control/how-to-migrate-from-acs-2-6-windows-to-cisco-secure-acs-4-2/m-p/1127962#M364660 <HTML><HEAD></HEAD><BODY><P>Your upgrade path would be:</P><P></P><P>Upgrade from ACS 2.6.4.4 to ACS 3.0.4</P><P>Upgrade ACS 3.0.4 to ACS 3.3.X</P><P>Now upgrade from ACS 3.3.x (ACS 3.2.1, 3.2.2, 3.2.3, 3.3.1, 3.3.2, or 3.3.4) to ACS 4.1.1.23 or ACS 4.1.1.24 on Windows. </P><P>You cannot directly upgrade ACS 3.2.x or 3.3.x or 4.x to ACS 4.2.</P><P>You must upgrade to ACS 4.1.</P><P>Upgrade ACS SW 4.1.x to ACS SW 4.2 (Windows)</P><P>finally: </P><P>Take a backup from ACS 4.2 (Win) and copy it to a FTP server.</P><P>Do a restore from your ACS 4.2 Appliance from your backup file via FTP.</P><P>Check that FTP works before you start.</P><P>Cheers</P><P>P</P></BODY></HTML> Fri, 28 Nov 2008 12:31:18 GMT https://community.cisco.com/t5/network-access-control/how-to-migrate-from-acs-2-6-windows-to-cisco-secure-acs-4-2/m-p/1127962#M364660 pvanvuuren 2008-11-28T12:31:18Z Re: How to migrate from ACS 2.6 (windows) to Cisco Secure ACS 4. https://community.cisco.com/t5/network-access-control/how-to-migrate-from-acs-2-6-windows-to-cisco-secure-acs-4-2/m-p/1127963#M364681 <HTML><HEAD></HEAD><BODY><P>Is there any way to get these install images? TAC says I'm not allowed, because apparently buying two 4.2 SE's isn't enough to get older software images...</P><P></P><P>thanks!</P></BODY></HTML> Tue, 12 May 2009 21:41:39 GMT https://community.cisco.com/t5/network-access-control/how-to-migrate-from-acs-2-6-windows-to-cisco-secure-acs-4-2/m-p/1127963#M364681 shamrockfoods 2009-05-12T21:41:39Z Re: How to migrate from ACS 2.6 (windows) to Cisco Secure ACS 4. https://community.cisco.com/t5/network-access-control/how-to-migrate-from-acs-2-6-windows-to-cisco-secure-acs-4-2/m-p/1127964#M364717 <HTML><HEAD></HEAD><BODY><P>Upgrading from ACS 2.6 to ACS 3.3 then from ACS 3.3 to ACS 4.2 is possible....</P><P></P><P>Done it and it worked fine</P><P></P><P>Regards</P></BODY></HTML> Fri, 18 Feb 2011 11:58:19 GMT https://community.cisco.com/t5/network-access-control/how-to-migrate-from-acs-2-6-windows-to-cisco-secure-acs-4-2/m-p/1127964#M364717 igguidorevil 2011-02-18T11:58:19Z