topic Re: AAA Accounting in Network Access Control

AAA Accounting

victor_87 — Sun, 10 Mar 2019 23:02:30 GMT

Where is the ACS supposed to log commands typed in the AAA Client,

is it in the Tacacs+ accounting.csv file "cmd" field" or in the TACACS+ administration.csv file.

I can see all the commands in the tacacs+ administration csv file but none appears in the tacacs+ accounting csv file.

Am i doing something wrong. Please clarify

i have used the following commands on the AAA client for accounting

aaa accounting exec default start-stop group tacacs+

aaa accounting commands 1 default start-stop group tacacs+

aaa accounting commands 15 default start-stop group tacacs+

aaa accounting network default start-stop group tacacs+

aaa accounting system default start-stop group tacacs+

is something wrong in this part.

don-sullivan — Tue, 19 Aug 2008 18:49:31 GMT

If your looking for command history it's located in the administration.csv file. The accounting.csv details when the connection starts/stops.

victor_87 — Wed, 20 Aug 2008 04:03:18 GMT

If it has to log in the administration.csv, then it's okey, i was wondering if it has to be logged in the Accounting.csv "cmd" field.

Jagdeep Gambhir — Wed, 20 Aug 2008 18:29:39 GMT

TACACS accounting reports will only show session start and session stop logs. All commands would be logged in tacacs admin report.

Regards,

~JG