topic FL_26_TEST-3850#show run all in Network Access Control

commands missing on IOS 3.6.4E

antonioyan99 — Mon, 11 Mar 2019 06:37:11 GMT

Hi ISE experts,

I got a Catalyst 3850-24-p switch upgraded to IOS 3.6.4E recently, and found out below 2 commands are missing from the running configure.

radius-server vsa send accounting
radius-server vsa send authentication

the switch seems to take these 2 commands , but when I do 'show run' they don't show up in running config.

I found this on another 3850-24-T running the same code version.

Is this a bug?

thx.

Can you issue the following

nspasov — Mon, 28 Mar 2016 19:09:06 GMT

Can you issue the following command and see if you see those commands in the config:

show run all | i radius-server vsa

Thank you for rating helpful posts!

FL_26_TEST-3850#show run all

antonioyan99 — Mon, 28 Mar 2016 19:12:20 GMT

FL_26_TEST-3850#show run all | i radius-server vsa
radius-server vsa send accounting
radius-server vsa send authentication
FL_26_TEST-3850#show run | i radius-server vsa
FL_26_TEST-3850#

great, didn't know " show run all" before.

Thanks for your quick response!

You are welcome! The "show

nspasov — Mon, 28 Mar 2016 19:20:11 GMT

You are welcome! The "show run all" will display all of the commands in the configuration file including the default ones. Thus, it appears that the two commands that you were looking for a now default commands in version 3.6.4 🙂

Thank you for rating helpful posts!