topic Re: ISE 2.0 on KVM in Network Access Control

ISE 2.0 on KVM

Johandy01 — Mon, 11 Mar 2019 06:36:10 GMT

Hi all,

with ISE 2.0 the support for installation on Linux KVM is introduced. To test this in our envirionment we tried to install it from the ise-2.0.0.306.SPA.x86_64.iso.

Unfortunately, the installer stops after the hardware check, with a message "No CISCO Unique Device Identifier found"

When we run the hardware test option from the submenu, the installer tells us that the KVM virtual machine is not a VM..

Has anybody allready istalled ISE 2.0 on KVM.?? Or how can we make the UDI work?

We're runnning KVM on Ubuntu server / Openstack on radhat. On both platform the same issues.

Please provide me some hints!!

Johan

I have not personally

nspasov — Mon, 21 Mar 2016 18:37:24 GMT

I have not personally installed it on KVM. However, a couple of things to check:

1. Make sure that you assigned all of the required resources

2. Follow the Hardware Installation Guide:

http://www.cisco.com/c/en/us/td/docs/security/ise/2-0/installation_guide/b_ise_InstallationGuide20.pdf

Thank you for rating helpful posts!

Even after following all

muhammad_2013331 — Thu, 27 Jul 2017 02:01:59 GMT

Even after following all guideline on Ubuntu 16.10 it gives the same error about UDI...please can you confirm if it is working on KVM and how?

Re: ISE 2.0 on KVM

Felix.Schwarz — Thu, 24 Jan 2019 09:15:46 GMT

Hi,

we faced the same issue with KVM and ISE 2.3, but we could solve them. Please try the following steps:

1) shutdown your VM

2) search for the configuration file of your VM:
root@*****:~# cd /etc/libvirt
root@*****:/etc/libvirt# find -name *.xml
./qemu/"ISENAME".xml (f. e. ./qemu/PANTEST04102.xml)

3) edit the file of your VM: ->>virsh edit PANTEST04102

4) please add the following directly above <os>

5) add:

in to <o>

I hope this will help you

BR

Felix