topic I was able to find the in Network Access Control

ISE 2.1 Failed network device import

PAUL GILBERT ARIAS — Mon, 11 Mar 2019 07:17:41 GMT

Hello all,

I am trying to import a list of network devices with the minimum required information but it is failing. I get the following error "Failed bad input. Please remove markup scripts."

If I add the devices manually it works fine.

I am running ISE 2.1

What could be the problem?

Try opening your csv file in

jan.nielsen — Tue, 13 Dec 2016 14:18:45 GMT

Try opening your csv file in an editor like notepad or notepad++ and make sure there are no weird unprintable characters hiding in your text. Also, you could try just adding one device using the csv import, just to see if it fails at the first one.

Thanks for the reply. I am

PAUL GILBERT ARIAS — Tue, 13 Dec 2016 14:48:36 GMT

Thanks for the reply. I am doing that right now but I am not sure what is considered unprintable characters.

I was able to find the

PAUL GILBERT ARIAS — Tue, 13 Dec 2016 15:28:09 GMT

I was able to find the problem. The Tacacs shared secret was not accepted by ISE. I had to change it to something easy and now I have to manually change it after importing all the devices.

Thanks for the help