https://community.cisco.com/t5/network-access-control/ise/m-p/2975478#M37419 <P>Are you able to still login to the ISE GUI? Depending on what licenses expired you might not have access to the the GUI until you install valid licenses. If that happened then you will either need to purchase and install valid licenses or reach out to Cisco TAC/Licensing and ask for temporary licenses that you can use.&nbsp;</P> <P>Also, if you don't have a complicated deployment and/or a lot of configs then I would suggest you start with a fresh install vs upgrading.&nbsp;</P> <P>I hope this helps!</P> <P><EM>Thank you for rating helpful posts!</EM></P> Thu, 01 Dec 2016 17:49:47 GMT nspasov 2016-12-01T17:49:47Z https://community.cisco.com/t5/network-access-control/ise/m-p/2975477#M37417 <P>ise 1.4 with expired licenses and need to upgrade to 2.1 with expired licenses then install 2,1 licenses ? Is this possible?</P> Mon, 11 Mar 2019 07:15:48 GMT https://community.cisco.com/t5/network-access-control/ise/m-p/2975477#M37417 adelmohammad 2019-03-11T07:15:48Z https://community.cisco.com/t5/network-access-control/ise/m-p/2975478#M37419 <P>Are you able to still login to the ISE GUI? Depending on what licenses expired you might not have access to the the GUI until you install valid licenses. If that happened then you will either need to purchase and install valid licenses or reach out to Cisco TAC/Licensing and ask for temporary licenses that you can use.&nbsp;</P> <P>Also, if you don't have a complicated deployment and/or a lot of configs then I would suggest you start with a fresh install vs upgrading.&nbsp;</P> <P>I hope this helps!</P> <P><EM>Thank you for rating helpful posts!</EM></P> Thu, 01 Dec 2016 17:49:47 GMT https://community.cisco.com/t5/network-access-control/ise/m-p/2975478#M37419 nspasov 2016-12-01T17:49:47Z