TACACS Command accounting

anva12345 — Sun, 10 Mar 2019 22:51:30 GMT

We configured accoutnig in our network devices.But the commands users are typing is not showing in TACACS+ Accounting section.We r using ACS 4.1se and commands for accounting in devices are given below.

aaa accounting exec default start-stop group tacacs+

aaa accounting commands 1 default start-stop group tacacs+

aaa accounting commands 15 default start-stop group tacacs+

Please help

Re: TACACS Command accounting

Jagdeep Gambhir — Tue, 20 May 2008 16:09:59 GMT

Command accounting logs are stored in tacacs administration logs. Also there is a known issue on ver 4.1.1 and we need to apply patch ACS 4.1.1.23.5 to fix the issue.

Patch for appliance is available on

http://www.cisco.com/cgi-bin/tablebuild.pl/acs-soleng-3des

Patch name : ACS SE 4.1.1.23.5 accumulative patch

Patch for acs windows is available on

http://www.cisco.com/cgi-bin/tablebuild.pl/acs-win-3des

Patch Name : ACS 4.1.1.23.5 accumulative patch

Regards,

~JG

Do rate helpful posts

topic Re: TACACS Command accounting in Network Access Control

TACACS Command accounting

Re: TACACS Command accounting