topic Hi Shabeeb, in Network Access Control

ISE integration with Microsoft SCCM

SHABEEB KUNHIPOCKER — Mon, 11 Mar 2019 07:13:36 GMT

Hello All,

Did anyone successfully integrate ISE with SCCM? . I am trying to do the integration , but facing some issues. If anyone has a good document explaining the same , please share.

Thanks in advance

Shabeeb

Integrate how?

Marvin Rhoads — Sun, 13 Nov 2016 21:35:24 GMT

Integrate how?

We have used SCCM with several customers to deploy the AnyConnect Secure Mobility Client (VPN module, Network Access Module 802.1x supplicant and ISE Posture Agent)

Hi Marvin,

SHABEEB KUNHIPOCKER — Mon, 14 Nov 2016 05:11:44 GMT

Hi Marvin,

I am also trying with Anyconnect secure mobility client. The issue is that when I choose patch management requirement with "install missing patches" in my posture policy then ISE not pushing that posture requirement to the user.

Thanks

Shabeeb

There is a guide for ISE

Marvin Rhoads — Mon, 14 Nov 2016 05:23:07 GMT

There is a guide for ISE using SCCM as your patch manager. Please check it out here:

https://communities.cisco.com/docs/DOC-66933

After you've reviewed that, please let me know if that answers your question.

Hello Marvin,

SHABEEB KUNHIPOCKER — Mon, 14 Nov 2016 05:34:24 GMT

Hello Marvin,

I had followed this guide and still I am facing the problem.

Thanks

Shabeeb

Can you share your posture

Marvin Rhoads — Mon, 14 Nov 2016 05:49:26 GMT

Can you share your posture and authorization policies?

Hello Marvin,

SHABEEB KUNHIPOCKER — Mon, 14 Nov 2016 21:18:15 GMT

Hello Marvin,

Find the attached

Thanks

Shabeeb

The screen shots appear to

Marvin Rhoads — Fri, 18 Nov 2016 04:13:22 GMT

The screen shots appear to indicate the client was checked for two requirements and met both.

It may be best to just open a TAC case on this and let the assigned engineer look at it in real time.

Hello Marvin,

SHABEEB KUNHIPOCKER — Sat, 03 Dec 2016 09:32:02 GMT

Hello Marvin,

The issue got resolved in 2.1 patch 2. We tested and the policy gets pushed to client properly.

Thanks for the update!

Marvin Rhoads — Sun, 04 Dec 2016 03:45:40 GMT

Thanks for the update!

Hi Shabeeb,

mohan.doss19 — Mon, 10 Jul 2017 10:54:14 GMT

Hi Shabeeb,

Could you please share the working policies of SCCM integration with ISE . because i am also having requirements to integrate.

Thanks

Re: The screen shots appear to

hminniea — Wed, 05 Aug 2020 18:58:28 GMT

Hello Marvin...are you with Cisco, because my customer is having SCCM integration issues as well