topic Re: ACS5.1 upgrade failed. in Network Access Control

ACS5.1 upgrade failed.

Tim Stretton — Mon, 11 Mar 2019 00:13:16 GMT

Got information: "Manifest file not found in the bundle" by using command "patch install 5-1-0-44-1.tar.gpg ACS_Upgrade",

Any help? Thanks

Re: ACS5.1 upgrade failed.

jrabinow — Mon, 28 Jun 2010 05:10:20 GMT

The command for the upgrade is:

application upgrade application-bundle remote-repository-name

See http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.1/installation/guide/csacs_upg.html#wp1167547 step 3

Re: ACS5.1 upgrade failed.

Tim Stretton — Mon, 28 Jun 2010 11:29:10 GMT

It's weired. My ACS5.1 has different command sets now.

At beginning, the command is same as document, after I tried with a non existing repository and select "no" at save configurartion, the command set changed. Is this a stupid bug? Will open a ticket this morning.

Re: ACS5.1 upgrade failed.

Tim Stretton — Mon, 28 Jun 2010 11:41:46 GMT

Same result use command "application upgrade":

ACS01/admin# application upgrade 5-1-0-44-1.tar.gpg ACS_Upgrade
Do you want to save the current configuration ? (yes/no) [yes] ?
Generating configuration...
Saved the running configuration to startup successfully
% Manifest file not found in the bundle

Re: ACS5.1 upgrade failed.

lomonaco — Mon, 02 Aug 2010 15:59:57 GMT

Hi Kevin Sun,

You forgotten to put the comand acs before the patch argument...

The correct is "acs patch install 5-1-0-44-1.tar.gpg ACS_Upgrade"

By the way, I recommend that you use the last patch avaliable, 5-1-0-44-3.tar.gpg

My Best Regards,

Andre Lomonaco

Re: ACS5.1 upgrade failed.

ggozzi — Tue, 03 Aug 2010 09:46:08 GMT

Hi Guys

I have a problem to download in the acs tha patch 5-1-0-44-3.tar.gpg:

when I try to do this I receive the browser message :"Failed to extract version from the patch bundle. Please verify that this patch bundle is valid".

I have an 1121 appliance with 5.1.0.44.2 version installed.

The Md5 checksum of the downloaded file is correct.

Can Anyone help me?

Thanks and Regards

Re: ACS5.1 upgrade failed.

Tim Stretton — Tue, 03 Aug 2010 11:27:33 GMT

Mak sure don't use tftp as download server, use ftp only. This was my problem, not command related.

Re: ACS5.1 upgrade failed.

ggozzi — Tue, 03 Aug 2010 12:33:19 GMT

Thanks a lot yuo have resolved my problem.

good job!!!

Re: ACS5.1 upgrade failed.

patrick.tuttle — Tue, 17 Aug 2010 17:43:28 GMT

Hello,

After beeting my head against the wall on this, I decided to put the patch file onto a box that did not have pkzip or power archive on it. Essentially so that this patch file would not associate itself to a program.

I then re-named it to 5-1-0-44-3.tar.gpg (it downloads from Cisco's web site as 5-1-0-44-3.tar.tar)

I then was then able to use FTP to apply the patch and do "acs patch install 5-1-44-3.tar.gpg (repository)

Seems as though the script only wants to see .gph ye for some strange reason the file downloads as .tar.tar

-pat