topic Re: Tacacs+ Accounting Logging Problem in Network Access Control https://community.cisco.com/t5/network-access-control/tacacs-accounting-logging-problem/m-p/1307258#M378531 <HTML><HEAD></HEAD><BODY><P>The problem was caused by not have a separate AAA client configured for the this device in Network Configuration specifying Tacacs as the authentication method. The version before 4.1 allowed Radius data to share with Tacacs+, I should have read the Doc before upgrade.</P><P></P><P>Thanks,</P><P>Roger.</P><P></P></BODY></HTML> Mon, 17 Aug 2009 11:33:37 GMT ho-r 2009-08-17T11:33:37Z Tacacs+ Accounting Logging Problem https://community.cisco.com/t5/network-access-control/tacacs-accounting-logging-problem/m-p/1307256#M378529 <P>Hi,</P><P></P><P>I recently installed new copy of ACS4.2 with latest patch on Win2003 server, the problem I am having is any Tacacs+ accounting or admin related events are not logged, I checked logging is enabled for both services. Is this a permission problem on the Win2k3?</P><P></P><P>Thanks,</P><P>Roger.</P><P></P> Sun, 10 Mar 2019 23:39:00 GMT https://community.cisco.com/t5/network-access-control/tacacs-accounting-logging-problem/m-p/1307256#M378529 ho-r 2019-03-10T23:39:00Z Re: Tacacs+ Accounting Logging Problem https://community.cisco.com/t5/network-access-control/tacacs-accounting-logging-problem/m-p/1307257#M378530 <HTML><HEAD></HEAD><BODY><P>Obviously you have the logging targets enabled in the system config/Logging config... </P><P></P><P>Are you talking CSV, syslog or what?</P><P></P><P>CSLog does have its own service log which you could check for error messages.</P></BODY></HTML> Mon, 17 Aug 2009 10:39:31 GMT https://community.cisco.com/t5/network-access-control/tacacs-accounting-logging-problem/m-p/1307257#M378530 darpotter 2009-08-17T10:39:31Z Re: Tacacs+ Accounting Logging Problem https://community.cisco.com/t5/network-access-control/tacacs-accounting-logging-problem/m-p/1307258#M378531 <HTML><HEAD></HEAD><BODY><P>The problem was caused by not have a separate AAA client configured for the this device in Network Configuration specifying Tacacs as the authentication method. The version before 4.1 allowed Radius data to share with Tacacs+, I should have read the Doc before upgrade.</P><P></P><P>Thanks,</P><P>Roger.</P><P></P></BODY></HTML> Mon, 17 Aug 2009 11:33:37 GMT https://community.cisco.com/t5/network-access-control/tacacs-accounting-logging-problem/m-p/1307258#M378531 ho-r 2009-08-17T11:33:37Z