topic You can Allow PEAP with inner in Network Access Control

acs PEAP-TLS authentication

ELKHATTABI — Mon, 11 Mar 2019 07:09:58 GMT

hi,

actually i use ACS 5.8 as NPS server For my Computer using Certificate issued by AD CS. so i need to know what's the allowed protocols that must be activated on my ACS to permit computer authentcation pass by PEAP-TLS

thanks.

You can Allow PEAP with inner

Gagandeep Singh — Wed, 19 Oct 2016 11:53:00 GMT

You can Allow PEAP with inner methods : Allow EAP-TLS.

Under Access policy > Default Device admin > Allowed protocols.

Regards

Gagan

ps : rate if it helps!!!!

Hi,

ELKHATTABI — Wed, 19 Oct 2016 12:48:54 GMT

Hi,

thank you for your request, my computer with windows 7 use EAP-MSCHAP V2 as mode authentification so how it can communicate with the ACS i guess that i must allow EAP-MSCHAP V2 too under PEAP!!

i need to know howa can i verify if my computer is authentified by certification process?

Yes, you need to select

Gagandeep Singh — Wed, 19 Oct 2016 18:06:05 GMT

Yes, you need to select MSCHAPv2 as inner method for PEAP-MSCHAPv2.

Regards

Gagan

PS : rate as correct if it helps!!!!