https://community.cisco.com/t5/network-access-control/ise-printer/m-p/2932192#M37952 <P>Hi there! Manual scan in ISE 2.1 is located under:</P> <P><STRONG>Work Centers &gt; Profiler &gt; Manual Scans</STRONG></P> <P>I hope this helps!</P> <P><EM>Thank you for rating helpful posts!</EM></P> Thu, 13 Oct 2016 00:57:02 GMT nspasov 2016-10-13T00:57:02Z https://community.cisco.com/t5/network-access-control/ise-printer/m-p/2932191#M37950 <P>Reading through some guides &amp; other threads, is it correct to say two of the most prominent ways to profile printers are SNMP &amp; NMAP probes?</P> <P>I was following the HowToGuide-30 on profiling, where it instructs how to perform a NMAP probe, but when I go to our ISE nodes under Admin / System/ Deployment, I don't see any button to do NMAP.</P> <P>What am I missing here?</P> <P>Is NMAP manual scan still supported in ISE 2.1?</P> <P><IMG src="https://community.cisco.com/legacyfs/online/media/ise-nmap.jpg" class="migrated-markup-image" /></P> Mon, 11 Mar 2019 07:08:46 GMT https://community.cisco.com/t5/network-access-control/ise-printer/m-p/2932191#M37950 CSCO10662744_2 2019-03-11T07:08:46Z https://community.cisco.com/t5/network-access-control/ise-printer/m-p/2932192#M37952 <P>Hi there! Manual scan in ISE 2.1 is located under:</P> <P><STRONG>Work Centers &gt; Profiler &gt; Manual Scans</STRONG></P> <P>I hope this helps!</P> <P><EM>Thank you for rating helpful posts!</EM></P> Thu, 13 Oct 2016 00:57:02 GMT https://community.cisco.com/t5/network-access-control/ise-printer/m-p/2932192#M37952 nspasov 2016-10-13T00:57:02Z