topic Cisco ISE 2.1 patch released in Network Access Control

Cisco ISE 2.1 patch released

Maximilian Usinger — Mon, 11 Mar 2019 07:03:47 GMT

Hi everyone,

Cisco just released a patch for the Cisco ISE 2.1:
https://software.cisco.com/download/release.html?mdfid=283801620&softwareid=283802505&release=2.1.0

Greetings,
Max

no release note for the patch

egodalisse — Tue, 13 Sep 2016 06:43:13 GMT

no release note for the patch so far

Hi,although there is no

Maximilian Usinger — Tue, 13 Sep 2016 07:54:16 GMT

Hi,

although there is no current link to any release notes on the download side, you can see the patch notes when you follow the link to the old release notes:

http://www.cisco.com/c/en/us/td/docs/security/ise/2-1/release_notes/ise21_rn.html

I assume as the link is still not shown, these patch notes are not official or complete.

Greetings,
Max

Edit: spelling

Hi all,

egodalisse — Fri, 23 Sep 2016 11:51:32 GMT

Hi all,

is there any feedback regarding patch 1 ? there is a couple of resolved caveats included in that update I need, just want to make sure that patch is safe to install on prod deployement 😛

Hi,

Gagandeep Singh — Fri, 23 Sep 2016 14:32:46 GMT

Hi,

Below release notes contains resolved caveats on patch 1.

http://www.cisco.com/c/en/us/td/docs/security/ise/2-1/release_notes/ise21_rn.html#14956

Already posted the discussion on it.

https://supportforums.cisco.com/discussion/13119816/cisco-ise-21-patch-1-released

Regards

Gagan

PS: rate if it helps!!!!

I am aware of several

jrabinow — Sun, 25 Sep 2016 14:59:26 GMT

I am aware of several customers who have installed the patch on their systems and resolved the issues as expected

I could not find the

egodalisse — Mon, 26 Sep 2016 06:28:35 GMT

I could not find the procedure for patch 1 upgrade, wondering if it changed after 2.X.

Is it the same as before ?

Upload patch to the repository

Adminitration -> Upgrade

Hi ,

Aditya Ganjoo — Mon, 26 Sep 2016 06:46:09 GMT

Hi ,

Yes the steps are the same.

Regards,

Aditya

Please rate helpful posts and mark correct answers.

Hi,you can upload the patch

Maximilian Usinger — Mon, 26 Sep 2016 07:12:08 GMT

Hi,

you can upload the patch file at "Administration -> System -> Maintenance"
Please keep in mind that every node will restart after installing the patch.

The patchfile is distributed automatically on every service node in the deployment one by one, if you start the patch install on the web GUI.

Don't wonder if you wont receive any notifications.

Greetings,
Max