topic Dot1x problem in Network Access Control https://community.cisco.com/t5/network-access-control/dot1x-problem/m-p/1014294#M385531 <P>HELLO ALL:</P><P>We are having some problem with Dot1x.When users connect to Dot1x authentication port, users laptops are not getting authenticated with the server.I am attaching the debug output and running config .</P><P></P><P>Thanks</P><P></P><P> </P><P></P> Sun, 10 Mar 2019 22:50:07 GMT vishwancc 2019-03-10T22:50:07Z Dot1x problem https://community.cisco.com/t5/network-access-control/dot1x-problem/m-p/1014294#M385531 <P>HELLO ALL:</P><P>We are having some problem with Dot1x.When users connect to Dot1x authentication port, users laptops are not getting authenticated with the server.I am attaching the debug output and running config .</P><P></P><P>Thanks</P><P></P><P> </P><P></P> Sun, 10 Mar 2019 22:50:07 GMT https://community.cisco.com/t5/network-access-control/dot1x-problem/m-p/1014294#M385531 vishwancc 2019-03-10T22:50:07Z Re: Dot1x problem https://community.cisco.com/t5/network-access-control/dot1x-problem/m-p/1014295#M385562 <HTML><HEAD></HEAD><BODY><P>On interface FastEthernet0/7 Your reauthentication time is set to 7200 seconds which is by default is 3600 seconds.which means that reauthentication will happen every 7200 sec.Your quite mode timing is 5 sec and default is 30 sec.Try using the the default settings for reauth,retransmission and quiet mode timers and check for the issue.Also check for the Dot1x configuration.</P><P></P><P>refer the following url for the configuration guide:</P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/products/sw/secursw/ps2086/products_configuration_example09186a00805e7a18.shtml" target="_blank">http://www.cisco.com/en/US/products/sw/secursw/ps2086/products_configuration_example09186a00805e7a18.shtml</A></P></BODY></HTML> Wed, 14 May 2008 15:16:44 GMT https://community.cisco.com/t5/network-access-control/dot1x-problem/m-p/1014295#M385562 smahbub 2008-05-14T15:16:44Z Re: Dot1x problem https://community.cisco.com/t5/network-access-control/dot1x-problem/m-p/1014296#M385622 <HTML><HEAD></HEAD><BODY><P>Add the following to your configuration:</P><P></P><P>aaa authorization network default group ias-servers</P></BODY></HTML> Fri, 23 May 2008 22:47:34 GMT https://community.cisco.com/t5/network-access-control/dot1x-problem/m-p/1014296#M385622 michael.leblanc 2008-05-23T22:47:34Z