topic Re: PEAP authentication in Network Access Control

PEAP authentication

ismail884 — Sun, 10 Mar 2019 22:36:34 GMT

Hi,

I've impelemented the PEAP authentication successfully.

when trying to connect to the network,the station prompt for the username and password just for the first connection,and then it stores that username/password in the registry base.

can I do somthing to make it prompts in each connection?

thanks

Re: PEAP authentication

Jagdeep Gambhir — Fri, 18 Jan 2008 16:44:14 GMT

Here is the link to remove cached username during peap authentication from windows.

http://support.microsoft.com/kb/823731/

This is a windows feature for peap

Regards,

~JG

Do rate helpful posts

Re: PEAP authentication

ismail884 — Mon, 21 Jan 2008 15:39:10 GMT

I've delete the registre entry for EAPoL,But each time connected it re-enable it.

is there another solution that permit to prompt for Login/password for each connection.?

thanks

Re: PEAP authentication

valstan — Mon, 21 Jan 2008 22:08:03 GMT

Do you have the "Enable Fast Reconnect" disabled in the Global Authentication Setup?

Re: PEAP authentication

ismail884 — Tue, 22 Jan 2008 14:25:37 GMT

it is disabled

Re: PEAP authentication

cisco24x7 — Tue, 22 Jan 2008 14:55:30 GMT

FYI.

I am having the same exact issue as ismail884.

However, I am using steelbelted/juniper

radius for PEAP authentication instead of Cisco

ACS. I also have "enable FAST-PEAP" disabled

in steelbelted radius but somehow the credential

still cache on the windows client.

Re: PEAP authentication

cisco24x7 — Tue, 22 Jan 2008 14:56:14 GMT

steelbelted radius version I am using is

6.x.

CCIE Security