topic Re: AAA Authorization on PIX in Network Access Control

AAA Authorization on PIX

networker99 — Sun, 10 Mar 2019 23:39:36 GMT

I have set up authentication and Authorization on the PIX. Authentication works but Authorization fails. I try to debug but nothing shows up (on PIX or ACS), but it does if I debug Authentication

Re: AAA Authorization on PIX

Jagdeep Gambhir — Fri, 21 Aug 2009 12:52:02 GMT

Make sure you have enable authentication ,

aaa authentication ssh console TACACS LOCAL

aaa authentication telnet console TACACS LOCAL

aaa authentication enable console TACACS LOCAL

aaa authorization command TACACS LOCAL

Incase it does not work pls get aaa config

Regards,

~JG

Do rate helpful posts

Re: AAA Authorization on PIX

networker99 — Fri, 21 Aug 2009 12:59:43 GMT

-aaa authentication ssh console TACACS LOCAL

-aaa authorization command TACACS LOCAL

-aaa-server TACACS (inside) host [ip_address] [key] timeout 10

Re: AAA Authorization on PIX

Jatin Katyal — Fri, 21 Aug 2009 14:40:21 GMT

PIX\ASA command authorization does require enable authentication in the config.

You need to turn on enable authentication:

Here is the command

aaa authentication enable console TACACS LOCAL

HTH

Regards,

Re: AAA Authorization on PIX

Jagdeep Gambhir — Fri, 21 Aug 2009 15:24:04 GMT

Hi Lewis,

Pls add enable authentication command to make it work.

Regards

~JG

Do rate helpful posts