topic You're very welcome in Network Access Control

Radius server test options

czekon1982 — Mon, 11 Mar 2019 06:54:50 GMT

Hello,

Does anyone have a experience in testing radius server availability? I what way the switch can test radius server availability and what action it will take after detecting server is dead? Setup is done with ISE 1.4.

Hi

Francesco Molino — Wed, 06 Jul 2016 12:49:56 GMT

For how switch communicate with radius and how you configure the switch for dead timers, I will redirect you on Cisco documentation that's very simple and complete as well.

http://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/identity-based-networking-services/whitepaper_C11-731907.html

All parameters to mark a server as Dead and how long it will be considered as dead are tweak-able. Setting dynamically some servers as dead if no answers could result in a better radius performance answer.

Thanks

PS: Please don't forget to rate and mark as correct answer if this answered your question.

Hi,

czekon1982 — Wed, 06 Jul 2016 13:04:38 GMT

Hi,

Thanks for quick replay. Document provided by you is very useful.

Thanks a lot.

You're very welcome

Francesco Molino — Wed, 06 Jul 2016 13:07:21 GMT

You're very welcome