topic Cisco ACS 3.2 NIC compatibility in Network Access Control https://community.cisco.com/t5/network-access-control/cisco-acs-3-2-nic-compatibility/m-p/868856#M391774 <P>Is there anyone install two NIC in your windows server to run Cisco ACS 3.2? </P> Sun, 10 Mar 2019 22:36:29 GMT cnadvisers 2019-03-10T22:36:29Z Cisco ACS 3.2 NIC compatibility https://community.cisco.com/t5/network-access-control/cisco-acs-3-2-nic-compatibility/m-p/868856#M391774 <P>Is there anyone install two NIC in your windows server to run Cisco ACS 3.2? </P> Sun, 10 Mar 2019 22:36:29 GMT https://community.cisco.com/t5/network-access-control/cisco-acs-3-2-nic-compatibility/m-p/868856#M391774 cnadvisers 2019-03-10T22:36:29Z Re: Cisco ACS 3.2 NIC compatibility https://community.cisco.com/t5/network-access-control/cisco-acs-3-2-nic-compatibility/m-p/868857#M391817 <HTML><HEAD></HEAD><BODY><P>ACS is not supported on system running dual NIC's . It will create lots of problem during</P><P>replication process and during authentication also </P><P></P><P></P><P>Regards,</P><P>~JG</P><P></P><P>Do rate if helps</P></BODY></HTML> Fri, 18 Jan 2008 13:57:14 GMT https://community.cisco.com/t5/network-access-control/cisco-acs-3-2-nic-compatibility/m-p/868857#M391817 Jagdeep Gambhir 2008-01-18T13:57:14Z Re: Cisco ACS 3.2 NIC compatibility https://community.cisco.com/t5/network-access-control/cisco-acs-3-2-nic-compatibility/m-p/868858#M391841 <HTML><HEAD></HEAD><BODY><P>Running ACS on system with multiple NICs is</P><P>not supported by Cisco TAC but it does work.</P><P>You just need to make sure you have proper</P><P>route(s) on the ACS server back to the </P><P>request client. It does work and I used it</P><P>to prepare it for the CCIE Security lab.</P><P></P><P>CCIE security</P><P></P><P></P></BODY></HTML> Fri, 18 Jan 2008 20:07:18 GMT https://community.cisco.com/t5/network-access-control/cisco-acs-3-2-nic-compatibility/m-p/868858#M391841 cisco24x7 2008-01-18T20:07:18Z