topic Thank you! problem is solved in Network Access Control

wrong time in ISE

Vladimir Radchenko — Tue, 26 Mar 2019 00:34:48 GMT

Hi! Anybody knows why clock time in ISE CLI and ISE WEB is different? I set up NTP and timezone after that checked the correct time in CLI, but in WEB GUI time is added 1 hour. How to solve this problem?

Hi ,

Naresh Ginjupalli — Thu, 30 Jun 2016 05:55:13 GMT

Hi ,

May I know the timezone you are using to configure in ISE.

I perform all steps in

Vladimir Radchenko — Thu, 30 Jun 2016 07:14:26 GMT

I perform all steps in according with official guide: http://www.cisco.com/c/en/us/td/docs/security/ise/2-0/admin_guide/b_ise_admin_guide_20.html (through CLI)

but problem still actual

Hi ,

Naresh Ginjupalli — Thu, 30 Jun 2016 09:54:28 GMT

Hi ,

For certain timezones, example Asia/Novosibirsk, ISE will show the correct time on CLI but the wrong time on GUI. GUI will be one hour behind CLI.
change it to one of the timezone with GMT value inside (show timezones), for example Etc/GMT+6change it other timezone for example: Asia/Qyzylorda

Thank you! problem is solved

Vladimir Radchenko — Thu, 30 Jun 2016 13:41:52 GMT

Thank you! problem is solved