topic Re: Adding database replication to ACS in Network Access Control

Adding database replication to ACS

sourcebridge — Sun, 10 Mar 2019 22:32:38 GMT

I'm installing a backup ACS4.1,The primary server does not have database replication configured on it,

I would like to add this feature, beacuse i need to make it the Primary and replicate it's database to the new backup box i'm setting up, to which i was able to add the feature during the installation.

So i guess my question is: how do i add the database replication feature on Cisco ASC4.1 - post install?

Please help

Re: Adding database replication to ACS

Premdeep Banga — Thu, 29 Nov 2007 20:57:06 GMT

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a0080742f60.shtml

http://www.cisco.com/en/US/products/sw/secursw/ps2086/products_configuration_example09186a00800e518a.shtml

Regards,

Prem

Re: Adding database replication to ACS

sourcebridge — Thu, 29 Nov 2007 21:07:21 GMT

Thanks, i've been through these documents already..

The issue is that the primary server is not configured with the replication feature, so it doesn't show up on the "system configuration menu"..withhout this i cannot invoke database replication. but i have this set correctly on the new secondary.

How do i make "ACS internal database Replication" Show up in the "system configuration menu" ?

thanks again?

Re: Adding database replication to ACS

Premdeep Banga — Thu, 29 Nov 2007 21:09:34 GMT

Interface configuration > Advanced Options and check internal database replication.

Regards,

Prem

Re: Adding database replication to ACS

sourcebridge — Thu, 29 Nov 2007 21:36:11 GMT

It was staring right there at me!!!!

Thanks!

Re: Adding database replication to ACS

Premdeep Banga — Thu, 29 Nov 2007 21:37:34 GMT

Glad could help.

Please mark the thread resolved, so that others can benefit

Regards,

Prem