topic Hi Neno, Thanks in advance. I in Network Access Control

Cisco ISE boot error

linlinoo — Mon, 11 Mar 2019 06:34:41 GMT

Hi All,

Please help me. I have Cisco ISE 3415 appliance in our office. Now, i am facing " Failed to find bootable device, retying..... " error at startup. How to solve this problem.

BR,

Lin Lin

Hi Lin, do you have access to

nspasov — Tue, 15 Mar 2016 14:32:52 GMT

Hi Lin, do you have access to the CIMC? If yes, can you check and make sure that your disk is there and healthy?

Thank you for rating helpful posts!

Hi Neno, Thanks in advance. I

linlinoo — Tue, 15 Mar 2016 15:35:42 GMT

Hi Neno, Thanks in advance. I can access to CIMC. When i checked disk drive, i can't see any disk. Actually, I have only one disk drive in slot-1. How to do to detect this disk drive? At previous time, i could boot with ISE 1.4 version. When i changed to default BIOS settings, i face " Failed to find bootable device " error. I really appreciate your support. Please help me.

If you don't see the disk in

nspasov — Tue, 15 Mar 2016 16:58:49 GMT

If you don't see the disk in the CIMC then there is a good chance that the disk has gone bad 😞 I would recommend you open a TAC case.

Thank you for rating helpful posts!