topic It doesn't write anything in in Network Access Control

ACS authenticate through an external ODBC

omneyasiam — Mon, 11 Mar 2019 06:33:47 GMT

Hi,

I'm using Cisco ACS 4.2 and i'm trying to authenticate via an external ODBC. I successfully created the ODBC and it connects to the external database then I configured the ACS to connect to the ODBC. Also I have selected this external ODBC in the "Unknown User Policy" section. However, when ACS tries to authenticate any user that is found in the external database it fails.

Appreciate your help.

What failure reason do you

Jatin Katyal — Thu, 10 Mar 2016 08:58:59 GMT

What failure reason do you see in Failed and Passed reports? If the ODBC is selected as a database in Check the following external user databases, it should work.

~ Jatin

It doesn't write anything in

omneyasiam — Thu, 10 Mar 2016 09:16:17 GMT

It doesn't write anything in the Failed and Passed reports. I think it doesn't reach the point where it sends the request to the database though ACS is successfully connected to the ODBC.