topic Re: ACS support for ACE Module in Network Access Control

ACS support for ACE Module

slawson71 — Sun, 10 Mar 2019 23:07:51 GMT

Does ACS for Windows 3.3 support AAA for the ACE module?

Re: ACS support for ACE Module

firewalz — Fri, 10 Oct 2008 20:04:18 GMT

I personally have had problems with this, the ACE uses role based user access, and if ACS does not pass the attributes correctly than you default to a non admin role. I am using ACE version A1_6.1 (safe harbor version) and was told this was a bug and newer versions should work.

Re: ACS support for ACE Module

cisco24x7 — Fri, 10 Oct 2008 20:14:11 GMT

I don't think that is correct. I am still

having issues with ACE and ACS. See below:

ACE version Software

loader: Version 0.95

system: Version A1(7b) [build 3.0(0)A1(7b)

Cisco ACS version 4.0.1

I am trying to authenticate admin users with AAA authentication for ACE management.

This is what I've done:

ACE-lab/Admin(config)# tacacs-server host 192.168.3.10 key 123456 port 49

warning: numeric key will not be encrypted

ACE-lab/Admin(config)# aaa group server tacacs+ cciesec

ACE-lab/Admin(config-tacacs+)# server ?

TACACS+ server name

ACE-lab/Admin(config-tacacs+)# server 192.168.3.10

can not find the TACACS+ server

specified TACACS+ server not found, please configure it using tacacs-server host ... and then retry

ACE-lab/Admin(config-tacacs+)#