AP (Aironet) authentication using ACS

Amin Shaikh — Sun, 10 Mar 2019 22:54:16 GMT

Hello,

I have two requirement for AP using ACS,

Is the Pt#2 possible using ACS

<1>

I want administrator to modify any settings on AP using ACS authentication.

<2>

All users who wants to use AP for network connection should be authenticated using ACS. ( in ACS authentication is using Active-Directory )

Re: AP (Aironet) authentication using ACS

Jagdeep Gambhir — Fri, 13 Jun 2008 12:07:57 GMT

Hi ,

There are two section in NAR"s.

Ist is IP based NAR

2nd is CLI/DNIS based

So for wireless users you need to apply only IP based NAR with condtion set to deny AP or NDG. By this wireless uses will NOT be able to ssh/telnet/http but they can connect to wireless network.

For admin users , no NAR would be configured. So that solve your issue

Check out this white paper,

http://www.cisco.com/en/US/products/sw/secursw/ps2086/products_white_paper09186a00801a8fd0.shtml

Regards,

~JG

Do rate helpful posts

topic Re: AP (Aironet) authentication using ACS in Network Access Control

AP (Aironet) authentication using ACS

Re: AP (Aironet) authentication using ACS