topic Re: ASA enable mode with ACS in Network Access Control https://community.cisco.com/t5/network-access-control/asa-enable-mode-with-acs/m-p/956622#M407422 <HTML><HEAD></HEAD><BODY><P>Unfortunately that is not possible as ASA does not support Exec Authorization.</P><P></P><P></P><P>Regards,</P><P>~JG</P><P></P><P>Do rate helpful posts</P></BODY></HTML> Fri, 14 Mar 2008 17:46:52 GMT Jagdeep Gambhir 2008-03-14T17:46:52Z ASA enable mode with ACS https://community.cisco.com/t5/network-access-control/asa-enable-mode-with-acs/m-p/956621#M407421 <P>Hi</P><P></P><P>When I SSH to my ASA is there anyway to go straight to enable mode? We use RSA SecurID which means I have to wait for the token to change before I go into enable mode at the moment.</P><P></P><P>ASA config:</P><P></P><P>aaa authentication ssh console CISCO-ACS LOCAL</P><P>aaa authentication serial console CISCO-ACS LOCAL</P><P>aaa authentication http console CISCO-ACS LOCAL</P><P>aaa authorization command CISCO-ACS LOCAL</P><P>aaa accounting enable console CISCO-ACS</P><P>aaa accounting serial console CISCO-ACS</P><P>aaa accounting ssh console CISCO-ACS</P><P>aaa accounting command CISCO-ACS</P><P></P><P>ACS config (Group Level)</P><P></P><P>Privilege level 15</P><P>Read/write command authorisation set</P><P></P><P>Thanks</P> Sun, 10 Mar 2019 22:43:25 GMT https://community.cisco.com/t5/network-access-control/asa-enable-mode-with-acs/m-p/956621#M407421 stretchlad 2019-03-10T22:43:25Z Re: ASA enable mode with ACS https://community.cisco.com/t5/network-access-control/asa-enable-mode-with-acs/m-p/956622#M407422 <HTML><HEAD></HEAD><BODY><P>Unfortunately that is not possible as ASA does not support Exec Authorization.</P><P></P><P></P><P>Regards,</P><P>~JG</P><P></P><P>Do rate helpful posts</P></BODY></HTML> Fri, 14 Mar 2008 17:46:52 GMT https://community.cisco.com/t5/network-access-control/asa-enable-mode-with-acs/m-p/956622#M407422 Jagdeep Gambhir 2008-03-14T17:46:52Z