topic Re: Network Authorization on ASA UsingRADIUS in Network Access Control https://community.cisco.com/t5/network-access-control/network-authorization-on-asa-usingradius/m-p/922911#M408122 <HTML><HEAD></HEAD><BODY><P>Dave,</P><P>AAA authorisation is not a feature with the ASA. Hence cisco-avpair = "shell:priv-lvl=15"</P><P>attribute is not sent from the ACS to the ASA.The ASA doesn't have this functionality yet and hence cannot be configured with TACACS also.</P><P></P><P></P><P>Regards,</P><P>~JG</P><P></P><P>Do rate helpful posts</P></BODY></HTML> Mon, 03 Dec 2007 14:22:43 GMT Jagdeep Gambhir 2007-12-03T14:22:43Z Network Authorization on ASA UsingRADIUS https://community.cisco.com/t5/network-access-control/network-authorization-on-asa-usingradius/m-p/922910#M408121 <P>Hi,</P><P></P><P>I'm trying to define where users can go to on the Internet, by using the cut through proxy and authenticate via RADIUS using Cisco AV-pair ACL's. The authentication works well, however the ASA does not allow you to use RADIUS authorization. I'm sure you were able to do this on the PIX. Has anyone got this working?</P><P></P><P>Thanks,</P><P>Dave</P> Sun, 10 Mar 2019 22:32:48 GMT https://community.cisco.com/t5/network-access-control/network-authorization-on-asa-usingradius/m-p/922910#M408121 kirkpad01 2019-03-10T22:32:48Z Re: Network Authorization on ASA UsingRADIUS https://community.cisco.com/t5/network-access-control/network-authorization-on-asa-usingradius/m-p/922911#M408122 <HTML><HEAD></HEAD><BODY><P>Dave,</P><P>AAA authorisation is not a feature with the ASA. Hence cisco-avpair = "shell:priv-lvl=15"</P><P>attribute is not sent from the ACS to the ASA.The ASA doesn't have this functionality yet and hence cannot be configured with TACACS also.</P><P></P><P></P><P>Regards,</P><P>~JG</P><P></P><P>Do rate helpful posts</P></BODY></HTML> Mon, 03 Dec 2007 14:22:43 GMT https://community.cisco.com/t5/network-access-control/network-authorization-on-asa-usingradius/m-p/922911#M408122 Jagdeep Gambhir 2007-12-03T14:22:43Z