topic The Alerts are triggered due in Network Access Control https://community.cisco.com/t5/network-access-control/authentication-limit-per-second-for-one-psn-node/m-p/2777621#M40821 <P>The Alerts are triggered due to the threshold in the menu : Administration/System/Settings/Alarm Settings, If you hit edit on a specific alarm, you can see the description of the alarm, and when it triggers. But as Neno mentions,&nbsp; you need to make sure that you are giving ise the ressources required, which are documented in the installation guide.</P> Fri, 22 Jan 2016 20:25:41 GMT jan.nielsen 2016-01-22T20:25:41Z authentication limit per second for one psn node https://community.cisco.com/t5/network-access-control/authentication-limit-per-second-for-one-psn-node/m-p/2777619#M40816 <P>Hello ,</P> <P></P> <P>I want to learn authentication limit per second&nbsp; for one psn node . I sometimes see ' High Authentication Latency ' and ' High Load Average' alerts .</P> <P>What is the limit for the alerts and authentication request for a psn ?</P> <P></P> <P>Many thanks.</P> Mon, 11 Mar 2019 06:24:58 GMT https://community.cisco.com/t5/network-access-control/authentication-limit-per-second-for-one-psn-node/m-p/2777619#M40816 CansuTkr1 2019-03-11T06:24:58Z A couple of questions for you https://community.cisco.com/t5/network-access-control/authentication-limit-per-second-for-one-psn-node/m-p/2777620#M40818 <P>A couple of questions for you:</P> <P>1. Are you using a virtual ISE appliance</P> <P>2. If yes to #1, then do you have resource reservations configured in your VM environment</P> <P><EM>Thank you for rating helpful posts!</EM></P> Fri, 22 Jan 2016 19:14:13 GMT https://community.cisco.com/t5/network-access-control/authentication-limit-per-second-for-one-psn-node/m-p/2777620#M40818 nspasov 2016-01-22T19:14:13Z The Alerts are triggered due https://community.cisco.com/t5/network-access-control/authentication-limit-per-second-for-one-psn-node/m-p/2777621#M40821 <P>The Alerts are triggered due to the threshold in the menu : Administration/System/Settings/Alarm Settings, If you hit edit on a specific alarm, you can see the description of the alarm, and when it triggers. But as Neno mentions,&nbsp; you need to make sure that you are giving ise the ressources required, which are documented in the installation guide.</P> Fri, 22 Jan 2016 20:25:41 GMT https://community.cisco.com/t5/network-access-control/authentication-limit-per-second-for-one-psn-node/m-p/2777621#M40821 jan.nielsen 2016-01-22T20:25:41Z