https://community.cisco.com/t5/network-access-control/acs4-1-end-user-interface/m-p/915413#M408656 <HTML><HEAD></HEAD><BODY><P>Under the IETF Radius Attributes section, You need to set radius attribute 28</P><P></P><P>Idle-Timeout:attribute 28</P><P></P><P>You will have to enter the time in Seconds</P><P></P><P></P><P>Regards,</P><P>~JG</P></BODY></HTML> Thu, 11 Oct 2007 00:10:18 GMT Jagdeep Gambhir 2007-10-11T00:10:18Z https://community.cisco.com/t5/network-access-control/acs4-1-end-user-interface/m-p/915412#M408655 <P>Hi all,</P><P></P><P>Currently, end users are prompted for authentication when they try to access the internet for username/password. </P><P></P><P>Is there any way to set the idle timer to a specific time? Per user or Per ACS Grouping?</P><P></P><P>Example: The user has been idle on that web session to any website for say 5 mins the session is timed out and they need to be reauthenticated through the ACS.</P><P></P> Sun, 10 Mar 2019 22:26:23 GMT https://community.cisco.com/t5/network-access-control/acs4-1-end-user-interface/m-p/915412#M408655 fredj1234 2019-03-10T22:26:23Z https://community.cisco.com/t5/network-access-control/acs4-1-end-user-interface/m-p/915413#M408656 <HTML><HEAD></HEAD><BODY><P>Under the IETF Radius Attributes section, You need to set radius attribute 28</P><P></P><P>Idle-Timeout:attribute 28</P><P></P><P>You will have to enter the time in Seconds</P><P></P><P></P><P>Regards,</P><P>~JG</P></BODY></HTML> Thu, 11 Oct 2007 00:10:18 GMT https://community.cisco.com/t5/network-access-control/acs4-1-end-user-interface/m-p/915413#M408656 Jagdeep Gambhir 2007-10-11T00:10:18Z