topic Re: Group mapping problem with AD after an upgrade 3.3 => 4.1(3) in Network Access Control

Group mapping problem with AD after an upgrade 3.3 => 4.1(3)

psix — Sun, 10 Mar 2019 22:22:14 GMT

Hello,

I have a problem of "group mapping" after an upgrade of ACS 3.3 => 4.1(3) Build 12 Patch 3.

Before the upgrade, it was working.

In "external user databases", I have a connexion to the active directory 2003 domain.

The ACS can list all the group of the domain. When a user authenticate, the password is well checked but for the ACS, the user is always in the NT group 'user' (even if the user is not in this group).

Exemple :

NT group : "VPN" => ACS group "VPN"

NT group : "user" => ACS group "user"

When a user A (in NT : only in the group 'VPN') is authenticated, the ACS will put this user in the group 'user'.

I don't know if I am realy clear .?.! 🙂

Thank's everybody for the help.

Phil

Re: Group mapping problem with AD after an upgrade 3.3 => 4.1(3)

Premdeep Banga — Tue, 04 Sep 2007 13:22:37 GMT

check if this applies,

CSCsk08313 : ACS 4.1 group mapping fails

Regards,

Prem

Re: Group mapping problem with AD after an upgrade 3.3 => 4.1(3)

psix — Tue, 04 Sep 2007 13:43:16 GMT

(Thank you Prem for the fast answer)

It is what I thought in the begining, but I found that the ACS act like if he always received the group 'User' from Active directory. It's stange...

Regards,

Phil.

Re: Group mapping problem with AD after an upgrade 3.3 => 4.1(3)

Premdeep Banga — Tue, 04 Sep 2007 13:46:11 GMT

Yes I cannot deny that, as it might something relating to that as well. As all the users are memebers of Domain Users, may be that is being returned or fetched, but other member ship information is not.

Strange - True 🙂

Regards,

Prem