topic Re: bandwidth management attributes in Network Access Control https://community.cisco.com/t5/network-access-control/bandwidth-management-attributes/m-p/780193#M409249 <HTML><HEAD></HEAD><BODY><P>Dear </P><P>Can I do limited by session [ rate limit ] by somehow than do it by QoS thanks a lot for your</P></BODY></HTML> Wed, 15 Aug 2007 10:44:06 GMT ralwarrag 2007-08-15T10:44:06Z bandwidth management attributes https://community.cisco.com/t5/network-access-control/bandwidth-management-attributes/m-p/780191#M409247 <P>please i know which attributes that support it by Cisco,i can use it to limit the bandwidth [bandwidth control or management ] for the users !! </P> Sun, 10 Mar 2019 22:20:01 GMT https://community.cisco.com/t5/network-access-control/bandwidth-management-attributes/m-p/780191#M409247 ralwarrag 2019-03-10T22:20:01Z Re: bandwidth management attributes https://community.cisco.com/t5/network-access-control/bandwidth-management-attributes/m-p/780192#M409248 <HTML><HEAD></HEAD><BODY><P>Sounds like you need QoS. AFAIK you have to define the QoS policy on the device and then the AAA server can (per user) assign the desired policy</P><P></P><P>There's a how to doc here:</P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/products/sw/iosswrel/ps1839/products_feature_guide09186a00801541cb.html#wp1027129" target="_blank">http://www.cisco.com/en/US/products/sw/iosswrel/ps1839/products_feature_guide09186a00801541cb.html#wp1027129</A></P><P></P><P>In ACS you'd add a Cisco-Av-Pair with the following content</P><P></P><P>"ip:sub-policy-In=<YOUR policy="" name="">" </YOUR></P><P>"ip:sub-policy-Out=<YOUR policy="" name="">" </YOUR></P><P></P></BODY></HTML> Wed, 15 Aug 2007 10:03:36 GMT https://community.cisco.com/t5/network-access-control/bandwidth-management-attributes/m-p/780192#M409248 darpotter 2007-08-15T10:03:36Z Re: bandwidth management attributes https://community.cisco.com/t5/network-access-control/bandwidth-management-attributes/m-p/780193#M409249 <HTML><HEAD></HEAD><BODY><P>Dear </P><P>Can I do limited by session [ rate limit ] by somehow than do it by QoS thanks a lot for your</P></BODY></HTML> Wed, 15 Aug 2007 10:44:06 GMT https://community.cisco.com/t5/network-access-control/bandwidth-management-attributes/m-p/780193#M409249 ralwarrag 2007-08-15T10:44:06Z