topic Thank you for the quick in Network Access Control

Guest access without username or password

Matt Duncan — Mon, 11 Mar 2019 06:21:19 GMT

I have been asked by upper management to grant wireless guest access to internet only without the use of a username or password. I still want the Guests to be redirected to AUP web page and must agree to it. On both my ISE appliance and WLC I cant seem to be able to find a way to do that without a username and password. Any guidance would be much appreciated. 5508 WLC and ISE 1.2.

Thank you

This is a supported workflow

Karsten Iwen — Mon, 28 Dec 2015 15:10:18 GMT

This is a supported workflow with ISE 1.3 and higher. There you can configure your Guest-access as a "Hotspot". Your guests will see the AUP and if you want they have to enter an access-code (same for all guests).

ISE 1.2 is already announced for EOL, so you have to prepare your upgrade anyway ... 😉

I'd at least upgrade to ISE 1

Marvin Rhoads — Mon, 28 Dec 2015 15:28:04 GMT

I'd at least upgrade to ISE 1.4, if not 2.0.

Besides the "Hotspot" feature that Karsten mentioned, a lot of other things are much improved.

Thank you for the quick

Matt Duncan — Mon, 28 Dec 2015 16:08:03 GMT

Thank you for the quick response. I am downloading the 1.4 upgrade bundle now and will start that process this weekend.

Don't forget to read the

Karsten Iwen — Mon, 28 Dec 2015 16:13:01 GMT

Don't forget to read the release-notes. There are some important notes for the update.