topic There is no "login local" on in Network Access Control

sh run blank result

admins0011111 — Mon, 11 Mar 2019 06:18:48 GMT

I have CISCO2921 15.4(3)M4:

aaa new-model
aaa authentication login default local
aaa authorization exec default local
username rancid privilege 3 secret 5 $dfgdfgsdfhsdhdfghdfghdfg
privilege exec level 3 show running-config view full
privilege exec level 3 show running-config view
privilege exec level 3 show running-config
privilege exec level 3 show

But when I login and try sh run it is empty. Why?

when you log in are you sure

Mark Malone — Thu, 10 Dec 2015 10:21:11 GMT

when you log in are you sure your priv 3 , check with below , what way is your vty configured

sw]#sh privilege
Current privilege level is 15

Yes of course.

admins0011111 — Thu, 10 Dec 2015 10:41:15 GMT

Yes of course.

#sh priv

Current privilege level is 3

Also I have:

line vty 0 4

access-class 23 in

exec-timeout 60 0

logging synchronous

transport input ssh

hmm you could try put login

Mark Malone — Thu, 10 Dec 2015 11:29:10 GMT

hmm you could try put login local under the vty so it reverts directly to your username/password or use login authentication default either for the aaa see if that helps

your config looks ok

http://www.cisco.com/c/en/us/support/docs/security-vpn/remote-authentication-dial-user-service-radius/13860-PRIV.html

There is no "login local" on

admins0011111 — Fri, 11 Dec 2015 07:38:25 GMT

There is no "login local" on Cisco routers. "login authentication default" not help.

Try this:

nspasov — Wed, 16 Dec 2015 00:38:25 GMT

Try this:

- Add the following command to your config:

file privilege 3

- Use the following command instead of show run

show run view full

Thank you for rating helpful posts!

It really works!

admins0011111 — Wed, 16 Dec 2015 03:58:05 GMT

It really works!

Great! Glad I was able to

nspasov — Wed, 16 Dec 2015 16:06:48 GMT

Great! Glad I was able to help 🙂