topic ACS SE won't boot. in Network Access Control

ACS SE won't boot.

peterhkim — Sun, 10 Mar 2019 22:17:56 GMT

I have a brand new ACS SE 1100. As soon as I pulg in the power, I see fast blinking blue light. Any idea anyone? I read this can be a power supply problem. Just want to make sure see if there is anyone who had same kind of experience.

thanks.

Re: ACS SE won't boot.

rochopra — Thu, 26 Jul 2007 18:29:00 GMT

ACS only comes in the following hardware versions:

1111

1112

1113

Will recommend you to go through following link to connect it for the first time:

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_soft/csacsapp/csapp41/igse41/instalap.htm#wp1108322

Try connecting console to appliance and see what you are getting on console.

Hope this helps.

Thanks & Regards

Rohit Chopra

TAC Engineer-AAA

Cisco Systems

Email: rochopra@cisco.com

Phone: 212-329-2092 Extn:2156

Timing: Mon-Fri : 10:00AM - 6:00PM (MST)

Re: ACS SE won't boot.

mbroberson1 — Tue, 31 Jul 2007 14:31:11 GMT

Looks like you might hanve a hard drive issues on the ACS. WE experienced this and had to RMA and have Cisco send us a new ACS SE.