topic Re: UCP over ACS Solution Engine in Network Access Control

UCP over ACS Solution Engine

omarept — Sun, 10 Mar 2019 22:13:50 GMT

Hi List, we've adquired a new ACS v4.1 Solution Engine, before we used UCP, with ACS 3.2 Windows based. Can I enable UCP over ACS Solution Engine? is it possible? or maybe I have to use a diferent server...

Thanks...!

Omar

Re: UCP over ACS Solution Engine

Jagdeep Gambhir — Wed, 20 Jun 2007 23:09:36 GMT

Omar,

UCP can't be installed on Appliance, you need to have another server. AS ACS SE is build on

a hardend Windows OS, and is not accessible as a normal Windows OS server.

If we want to use UCP, we need to install UCP on a seprate Windows server, which has IIS

server running.

Regards,

Jagdeep

Re: UCP over ACS Solution Engine

rochopra — Thu, 21 Jun 2007 12:32:58 GMT

I agree with Jagdeep

Also would recomend checking the following link for UCP:

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_soft/csacs4nt/acs41/ucp41/ucp.htm

Re: UCP over ACS Solution Engine

omarept — Fri, 22 Jun 2007 02:41:10 GMT

Thank you for your response, but at this moment a Windows Server is impossible for me (reason: money) other possibilities? Apache/Linux?

Re: UCP over ACS Solution Engine

Premdeep Banga — Fri, 22 Jun 2007 09:17:27 GMT

Hi,

I have made it to run on Apache server, though only tested with HTTP, not HTTPS. But I know this for sure that it works with Apache.

Instructions will be same as for IIS, just make sure that you give enough privileges on "securecgi-bin" folder so that it can execute the scripts.

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_soft/csacs4nt/acs41/ucp41/ucp.htm

Have done this long way back. But yes this works.

Its worth a shot.

Regards,

Prem

Re: UCP over ACS Solution Engine

Premdeep Banga — Fri, 22 Jun 2007 09:20:02 GMT

FYI,

/-------------------------/

To install UCP, you must have a web server that runs either:

?Microsoft IIS 5.0 (included with Windows 2000)

?Microsoft IIS 6.0 (included with Windows Server 2003)

/-------------------------/

So if you face any issues with operation of UCP on Apache, TAC may not be able to help.

But we are here, so lets try our best 🙂

Cheers,

Prem

Re: UCP over ACS Solution Engine

manik.palekar — Sat, 07 Jul 2007 04:53:51 GMT

Hi ,

I have cisco ACS 1113 ,i have made windows vista desktop with IIS 7 ,i have configured iis ,given required privilege to securecgi-bin but still,'secure-bin' is not executing ,...i will be thankful if any one help me...thxxx

Re: UCP over ACS Solution Engine

Premdeep Banga — Sat, 07 Jul 2007 15:59:46 GMT

Hi,

IIS 7 is not tested with UCP, so it may/may not run properly. And it has not been tested with vista desktop.

To make it run, please ensure that you have following requirements fulfilled ,

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_soft/csacs4nt/acs41/ucp41/ucp.htm#wp1041168

To install UCP, you must have a web server that runs either:

?Microsoft IIS 5.0 (included with Windows 2000)

?Microsoft IIS 6.0 (included with Windows Server 2003)

Regards,

Prem

Re: UCP over ACS Solution Engine

manik.palekar — Sun, 08 Jul 2007 11:34:54 GMT

Thax ...