TACACS+ Administration Reports Problem

1aindyin2 — Sun, 10 Mar 2019 22:12:28 GMT

After we upgraded ACS to 4.1(1) Build 23 from 3.3.4 we no longer are getting information in the TACACS+ Administration Report Files.

aaa new-model

aaa authentication fail-message ^CC Login Failed, Please Try Again.^C

aaa authentication password-prompt Non_TACACS_Password:

aaa authentication username-prompt Non_TACACS_Username:

aaa authentication login default group tacacs+ local

aaa authentication login no_tacacs local

aaa authentication enable default group tacacs+ enable

aaa authorization config-commands

aaa authorization exec default group tacacs+ local

aaa authorization commands 0 default group tacacs+ local

aaa authorization commands 1 default group tacacs+ local

aaa authorization commands 15 default group tacacs+ local

aaa authorization network default group tacacs+

aaa accounting exec default start-stop group tacacs+

aaa accounting commands 0 default start-stop group tacacs+

aaa accounting commands 0 NetAdmins start-stop group tacacs+

aaa accounting commands 1 default start-stop group tacacs+

aaa accounting commands 7 default start-stop group tacacs+

aaa accounting commands 15 default start-stop group tacacs+

aaa accounting system default start-stop group tacacs+

Re: TACACS+ Administration Reports Problem

Jagdeep Gambhir — Mon, 11 Jun 2007 17:35:32 GMT

Hi,

This is a known issue, you need to apply patch ACS 4.1.1.23.5 to fix the issue.

Patch for appliance is availble on

Patch name : ACS SE 4.1.1.23.5 accumulative patch

Patch for acs windows is availble on

Patch Name : ACS 4.1.1.23.5 accumulative patch

That should fix the issue,

Regards,

Jagdeep

Note: If that answers your question, then please mark this thread as resolved, so that others can benefit from it.