topic Re: Show running config in Network Access Control https://community.cisco.com/t5/network-access-control/show-running-config/m-p/741052#M420548 <HTML><HEAD></HEAD><BODY><P>CZ,</P><P>This can be done locally.</P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/tech/tk59/technologies_tech_note09186a00800949d5.shtml" target="_blank">http://www.cisco.com/en/US/tech/tk59/technologies_tech_note09186a00800949d5.shtml</A></P><P></P><P>Regards,</P><P>Jagdeep</P></BODY></HTML> Mon, 04 Jun 2007 13:41:54 GMT Jagdeep Gambhir 2007-06-04T13:41:54Z Show running config https://community.cisco.com/t5/network-access-control/show-running-config/m-p/741051#M420547 <P>Hi.</P><P>I've logged the router provided by the ISP of mine (of course, with the a userid provided). I noticed that i can perform a "show running config", showing however only a partial configuration of the router (ACL, AAA, services running arent shown), a "show ip route" but i can't do anything else. I can't perform a "show privilege" or a telnet.</P><P></P><P>I figure this configuration is done via a RADIUS server (cant imagine a ISP using local authentication!), but my question is however this: how i can allow a user logging to the router to see only a part of the whole running configuration (suppose that the user has been already provided with a user being authenticated locally). This can be done only with radius?</P><P></P><P>Thank you</P><P>CZ</P> Sun, 10 Mar 2019 22:11:25 GMT https://community.cisco.com/t5/network-access-control/show-running-config/m-p/741051#M420547 Carlo Zaina 2019-03-10T22:11:25Z Re: Show running config https://community.cisco.com/t5/network-access-control/show-running-config/m-p/741052#M420548 <HTML><HEAD></HEAD><BODY><P>CZ,</P><P>This can be done locally.</P><P></P><P><A class="jive-link-custom" href="http://www.cisco.com/en/US/tech/tk59/technologies_tech_note09186a00800949d5.shtml" target="_blank">http://www.cisco.com/en/US/tech/tk59/technologies_tech_note09186a00800949d5.shtml</A></P><P></P><P>Regards,</P><P>Jagdeep</P></BODY></HTML> Mon, 04 Jun 2007 13:41:54 GMT https://community.cisco.com/t5/network-access-control/show-running-config/m-p/741052#M420548 Jagdeep Gambhir 2007-06-04T13:41:54Z