topic Re: Can ACS 3.3.4 have Cisco Aire-QoS-Level Radius Attribute? in Network Access Control

Can ACS 3.3.4 have Cisco Aire-QoS-Level Radius Attribute?

pppyyyppp — Sun, 10 Mar 2019 21:58:41 GMT

Understand that ACS 4.1 has build-in support for Cisco Airespace VSA (Aire-QoS-Level) Radius Attribute. We are running ACS 3.3.4 and can someone advise if we can manually coded this Cisco-Airespace attribute our ACS?

Thanks

Re: Can ACS 3.3.4 have Cisco Aire-QoS-Level Radius Attribute?

Vivek Santuka — Fri, 09 Feb 2007 12:08:50 GMT

Hi,

Attributes can be added using DBSync or csutil (only Windows). The followign link will help :-

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_soft/csacs4nt/acs33/user/sad.htm#wp756877

Regards,

Vivek

Re: Can ACS 3.3.4 have Cisco Aire-QoS-Level Radius Attribute?

pppyyyppp — Sat, 10 Feb 2007 04:45:05 GMT

Is there an example on how to do this (we are trying to code the Cisco-Airespace radius attribute (Aire-QoS-Level) to ACS3.3.4

I have read the document but still have do not understand how to code the ini file. What should I put for following VSA readings:

[User Defined Vendor]

Name=Cisco-Airespace

IETF Code=026

VSA 1=

VSA 2=

[your vsa]

Type=INTEGER

Profile=OUT

Re: Can ACS 3.3.4 have Cisco Aire-QoS-Level Radius Attribute?

amrkrish — Sat, 10 Feb 2007 06:31:24 GMT

I hope this should work. Please take a back up of your entire ACS before adding this UDV.

[User Defined Vendor]

Name=Cisco Airespace

IETF Code=14179

VSA 2=Aire-QoS-Level

[Aire-QoS-Level]

Type=integer

Profile=OUT

Enums=Aire-QoS-Level

[Aire-QoS-Level]

0=Bronze

1=Silver

2=GOld

3=Platinum

4=Uranium

Re: Can ACS 3.3.4 have Cisco Aire-QoS-Level Radius Attribute?

amrkrish — Sun, 11 Feb 2007 18:25:32 GMT

As it is a wireless device, you will need to use regedit to associate it with GenericEAP.dll.

Re: Can ACS 3.3.4 have Cisco Aire-QoS-Level Radius Attribute?

pppyyyppp — Mon, 12 Feb 2007 09:12:59 GMT

I have create the .ini file and have use the CSUtil.exe to import the UDV into ACS. I am able to see the Cisco-Airespace attribute. However, the authentication failed. I sniffed at the ACS 3.3 and see the Radius Access-Reject message.

You have mentioned "As it is a wireless device, you will need to use regedit to associate it with GenericEAP.dll.", can you please advise how to go about doing this in ACS 3.3?

Many thanks.